Experiments were conducted to collect gunpowder (propellant) residues from shooters' clothing by vacuum and to analyze them by gas chromatography/thermal energy analyzer (GC/TEA), ion mobility spectrometry (IMS), and gas chromatography/mass spectrometry (GC/MS). The residues were collected on fiberglass and Teflon filters using the portable vacuum sampler, all supplied with the IMS instrument. Several solvents were examined for the extraction of the propellant components from the filters. The extracts were centrifuged and/or filtered, concentrated by evaporation, and analyzed without any additional clean-up procedure. Based on the results of the study, an operational method for analysis of gunpowder residues was introduced into casework without changing the present operational technique for gunshot (primer) residue (GSR) analysis on clothing implemented by the Israel Police. In the modified method, the clothing is first sampled by double-side adhesive-coated aluminum stubs (the tape-lift method) for GSR analysis (the existing method), followed by vacuum collection for propellant residue examination. The issue of interpretation of the analytical results is discussed.

A study was conducted to develop an efficient method for extraction and analysis of gunpowder (propellant) residues from double-side adhesive coated stubs, which are used for sampling suspects or their clothing for gunshot (primer) residues (GSR). Conductive and non-conductive double-side adhesives were examined, and the analysis was carried out by gas chromatography/thermal energy analyzer (GC/TEA) and ion mobility spectrometry (IMS). The optimal procedure for the extraction, as was developed in the present study, employs two stages: (1) extraction of the stubs with a mixture of 80% v/v aqueous solution of 0.1% w/v of sodium azide and 20% v/v of ethanol employing sonication at 80?C for 15 min. and (2) residues from the obtained extract were further extracted with methylene chloride. The methylene chloride phase was concentrated by evaporation prior to analysis. Extraction efficiencies of 30–90% for nitroglycerine (NG) and for 2,4-dinitro toluene (2,4-DNT) were found. No significant interferences in the analysis were observed from the adhesives or skin. Interferences were observed in the analysis by the GC/TEA of the samples collected from hair. The method enables analysis of propellant residues on a double-side adhesive coated stub after it was examined for primer residues by scanning electron microscopy/energy dispersive X–ray spectroscopy (SEM/EDX). Thus, the probative value of the evidence may be increased.

A novel method for the estimation of intermediate-long firing distance range is proposed. The method is based on the characterization and chemical analysis of the smokeless powder particles on the target. An adhesive lifter is applied to collect the suspected gunshot residues (GSRs) from the surface of an object, and a Modified Griess Test (MGT) is carried out after alkaline hydrolysis on the adhesive lifter. Visualized particles are removed from the adhesive lifter under a microscope. Two systems are used for the analysis of organic discharge residues from the smokeless powder: (1) gas chromatography/thermal energy analysis (GC/TEA) for the analysis of nitroglycerine (NG) and 2,4-dinitrotoluene (2,4-DNT), (2) gas chromatography/mass spectrometry (GC/MS) for the identification of organic components such as DNT, NG, and some stabilizers. By using this procedure and confirming that the suspected particles are indeed GSR, one can estimate the intermediate-long firing distance of c. 0.75-3 m in the presence of very few particles and provide information for the classification of ammunition type in casework.