In this paper, the use of electrophotographic polymer powder transfer for the preparation of multi-material layers is discussed with respect to the application in powder bed-based additive manufacturing technologies as selective laser sintering (SLS). Therefore, the challenges of this task are considered verifying the critical process steps in order to develop a concept for an electrophotograhic laser sintering machine. On that basis, an experimental setup with a two-chamber design is realized which enables the investigation of the electrophotographic powder transfer at typical process conditions of SLS. Using this setup, transfer tests of polypropylene powder patterns were performed and qualitatively analyzed by photographic imaging. The results confirm the high potential of the application of electrophotography for multi-material powder deposition and show how a residual electrophotographic powder deposition can be achieved in general, which is independent from the already produced part height, in order to build up three-dimensional multi-material components.

During the cooling process of the molten material, residual stresses appear because the reduced volume of the cooled material cannot fully fill the space formerly occupied by the molten material. The morphology in and around the weld is formed by different factors depending on the material and process parameters. Different morphological structures relate to different mechanical properties. The process parameters and the welding results including morphology and residual stress are linked together. In this article, residual stresses and the mechanical properties of a hot-plate-welded polypropylene specimen with 0.1 wt.-% content of carbon black are investigated in relation to the morphology. Different measurement positions and joining displacements of parts to be joined result in different residual stress states and morphological structures. The higher the joining displacement, the higher the residual stress. Investigations of the morphology show a relation between the size of the alpha spherulites and the joining displacement. Diffractions patterns of wide-angle X-ray scattering (WAXS) are not able to resolve the beta phase of the specimen.

No abstract

No abstract

This contribution illustrates a methodology to customize biomechanical digital human models to resemble people of different age and ability groups for the use in simulations to support user-centered design. Especially the conception of man models of elderly people holds potential for analyzing and optimizing products to yield more universal designs, due to the high heterogeneity of needs, wants and capabilities in this specific age group. The present approach considers age-related performance restrictions, but is also extendable to disease-related limitations. The conception process itself includes the scaling of anthropometry, muscle forces, range of motion as well as motion speed based on data from literature or manual measurements. The parameters are either selected by percentiles or the specific values itself.