No abstract

Predicting the occurrence of solidification cracking during the solidification of metallic alloys by numerical simulation is a crucial move for avoiding such defects. Several models are widely available, however, the application of such are impacted due to the specific and not accessible parameters required. A simple, composition-based approach to rank solidification cracking susceptibility is presented. The procedure links computational thermodynamic and computational fluid dynamics (CFD) to provide an evaluation tool for solidification cracking. The method is related to the liquid filling phenomena in dendritic arms during solidification, which plays a critical role in solidification cracking phenomena. The dendritic profiles were constructed using the fraction of solid calculated by commercial thermodynamic software packages. The calculated results were compared with experimental solidification cracking data and showed satisfactory accuracy. The method capability to rank the solidification cracking propensity of similar alloys based on composition provides an important new operative tool to aid alloy development in welding and additive manufacturing related areas.

The mitigation of helium induced cracking in the heat affected zone (HAZ), a transition metallurgical zone between the weld zone and base metal, during repair welding is a great challenge in nuclear industry. Successful traditional fusion welding repairs are limited to metals with a maximum of a couple of atomic parts per million (appm) helium, and structural materials helium levels in operating nuclear power plants are generally exceed a couple of appm after years of operations. Therefore, fusion welding is very limited in nuclear power plants structural materials repairing. Friction stir welding (FSW) is a solid-state joining technology that reduces the drivers (temperature and tensile residual stress) for helium-induced cracking. This paper will detail initial procedural development of FSW weld trials on irradiated 304L stainless steel (304L SS) coupons utilizing a unique welding facility located at one of Oak Ridge National Laboratory’s hot cell facilities. The successful early results of FSW of an irradiated 304L SS coupon containing high helium are discussed. Helium induced cracking was not observed by scanning electron microscopy in the friction stir weld zone and the metallurgical zones between the weld zone and base metal, i.e. thermal mechanical affected zone (TMAZ) and HAZ. Characterization of the weld, TMAZ and HAZ regions are detailed in this paper.

No abstract

This report summarizes recent welding activities on irradiated alloys in the advanced welding facility at the Radiochemical Engineering Development Center of Oak Ridge National Laboratory and the development of post-weld characterization capabilities and procedures that will be critical for assessing the ability of the advanced welding processes housed within the facility to make successful repairs on irradiated alloys. This facility and its capabilities were