It is now commonly accepted that, in large pitch hollow-core 'kagomé' lattice fibers, the loss spectrum is related to resonances of the thin silica webs in the photonic crystal cladding. Moreover, coherent scattering from successive holes' layers cannot be obtained and adding holes' layers does not decrease the loss level. In this communication, cross-comparison of experimental data and accurate numerical modeling is presented that helps demonstrate that waveguiding in large pitch hollow-core fibers arises from the antiresonance of the core surround only and does not originate from the photonic crystal cladding. The glass webs only mechanically support the core surround and are sources of extra leakage. Large pitch hollow-core fibers exhibit features of thin walled and thick walled tubular waveguides, the first one tailoring the transmission spectrum while the second one is responsible for the increased loss figure. As a consequence, an approximate calculus, based on specific features of both types of waveguides, gives the loss spectrum, in very good agreement with experimental data. Finally, a minimalist hollow-core microstructured fiber, the cladding of which consists of six thin bridges suspending the core surround, is proposed for the first time.

No abstract

We review the use of hollow-core photonic crystal fibre (HC-PCF) for high power laser beam delivery. A comparison of bandgap HC-PCF with Kagome-lattice HC-PCF on the geometry, guidance mechanism, and optical properties shows that the Kagome-type HC-PCF is an ideal host for high power laser beam transportation because of its large core size, low attenuation, broadband transmission, single-mode guidance, low dispersion and the ultra-low optical overlap between the core-guided modes and the silica core-surround. The power handling capability of Kagome-type HC-PCF is further experimentally demonstrated by millijoule nanosecond laser spark ignition and ∼100 µJ sub-picosecond laser pulse transportation and compression.