No abstract

High pressure ratio turbocharger technology is used to decrease fuel consumption, reduce emissions and improve power density of an internal combustion engine. The centrifugal compressor is the turbocharger's core component. The reliability of its impeller becomes critical as the pressure ratio gets higher and the temperature starts playing an important role. In order to study the effect of the flow temperature on the reliability of a centrifugal compressor impeller, solid-fluid coupling is used to calculate the temperature distribution on the impeller surface. This temperature distribution is then applied as boundary condition in three-dimensional finite element analysis to analyze impeller stress. The results show that the percentage of impeller stress caused by thermal load remains approximately constant (about 2%) at different pressure ratios, which does not increase with increasing pressure ratio. Centrifugal load plays an absolutely critical role in the impeller stress at different pressure ratios. High pressure ratio also leads to an increase of air temperature, which causes higher material temperature and consequently the lower ultimate tensile strength of the impeller material. The maximum compressor pressure ratio which the impeller can bear decreases from 4.6 to 4.2 for the researched compressor if the effect of temperature on the ultimate tensile strength was considered. That means the effect of the temperature on compressor impeller strength and reliability at high pressure ratio should be considered while it can be ignored at low pressure ratio.

No abstract

No abstract