The commercialization of eco-friendly hydrogen vehicles has elicited attempts to expand hydrogen refueling stations in urban areas; however, safety measures to reduce the risk of jet fires have not been established. The RISKCURVES software was used to evaluate the individual and societal risks of hydrogen refueling stations in urban areas, and the F–N (Frequency–Number of fatalities) curve was used to compare whether the safety measures satisfied international standards. From the results of the analysis, it was found that there is a risk of explosion in the expansion of hydrogen refueling stations in urban areas, and safety measures should be considered. To lower the risk of hydrogen refueling stations, this study applied the passive and active independent protection layers (IPLs) of LOPA (Layer of Protection Analysis) and confirmed that these measures significantly reduced societal risk as well as individual risk and met international standards. In particular, such measures could effectively reduce the impact of jet fire in dispensers and tube trailers that had a high risk. Measures employing both IPL types were efficient in meeting international standard criteria; however, passive IPLs were found to have a greater risk reduction effect than active IPLs. The combination of RISKCURVES and LOPA is an appropriate risk assessment method that can reduce work time and mitigate risks through protective measures compared to existing risk assessment methods. This method can be applied to risk assessment and risk mitigation not only for hydrogen facilities, but also for hazardous materials with high fire or explosion risk.

No abstract

With an increase in the use of eco-friendly vehicles such as hybrid, electric, and hydrogen vehicles in response to the global climate crisis, accidents related to these vehicles have also increased. Numerical analysis was performed to optimize the safety of first responders responding to hydrogen vehicle accidents wherein hydrogen jet flames occur. The influence range of the jet flame generated through a 1.8-mm-diameter nozzle was analyzed based on five discharge angles (90, 75, 60, 45, and 30°) between the road surface and the downward vertical. As the discharge angle decreases toward the road surface, the risk area that could cause damage moves from the center of the vehicle to the rear; at a discharge angle of 90°, the range above 9.5 kW/m2 was 1.59 m and 4.09 m to the front and rear of the vehicle, respectively. However, at a discharge angle of 30°, it was not generated at the front but was 10.39 m to the rear. In response to a hydrogen vehicle accident, first responders should perform rescue activities approaching from a diagonal direction to the vehicle front to minimize injury risk. This study can be used in future hydrogen vehicle design to develop the response strategy of the first responders.

In this study, the stations on Seoul Metro line were categorized into 4 grades as a result of performing the smoke control safety evaluation that considered the conditions of platform air conditioning and exhaust system and mainline exhaust system in a bid to ensure the evacuation safety on platform and evacuation route to outside will be granted in a way of enhancing the efficiency of smoke control and exhaust system at subway stations. 4 stations were designated considering the safety evaluation grade and operation type of smoke control & exhaust system and then T.A.B was conducted. Consequently, the performance of existing smoke control & exhaust system appeared to have been far deteriorated from the design capacity.