We report on the development of a large-area few-layer graphene (FLG)—based transparent conductive electrode as a current spreading layer for GaN-based ultraviolet (UV) light-emitting diodes (LEDs). Large-area FLG was deposited on Cu using the chemical vapor deposition (CVD) method and subsequently transferred to the surface of the UV LED. UV light at a peak of 372 nm was emitted through the FLG-based transparent conductive electrode. The current spreading effects of FLG were clearly evident in both the optical images of electroluminescence (EL) and current-voltage (I-V) characteristics. Degradation of the FLG-based transparent conductive electrode could be induced by high power operation. Our results indicate that a large-area FLG-based electrode on GaN offers excellent current spreading and ultra-violet transparency properties when compared to the standard optoelectronic indium tin oxide (ITO) contact layer.
Three-dimensional (3D) nanostructures were obtained by the directed formation of multilayer block copolymer (BCP) thin films. The initial step in this strategy involves the assembly and cross-linking of cylinder-forming polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA) BCP, in which 1.5 mol % of reactive azido (-N(3)) groups were randomly incorporated along the styrene backbone. Significantly, assembly of thin films of lamellar-forming BCPs on top of the underlying cross-linked cylindrical layer exhibited perpendicular orientations of microdomains between lamellae and cylinder layers. From the theoretical calculation of free energy in the multilayers, it was found that the nematic interactions between polymer chains at the interface play a critical role in the perpendicular orientation of lamellae on the cross-linked cylinder layers. Removal of the PMMA domains then affords nonsymmetrical nanostructures which illustrate the promise of this strategy for the design of well-defined 3D nanotemplates. It was also demonstrated that this structure can be effectively used to enhance the light extraction efficiency of GaN light-emitting diodes. Furthermore, we anticipate that such 3D nanotemplates can be applied to various areas, including advanced BCP nanolithography and responsive surface coating.
We report that the oxidation of graphene-based highly transparent conductive layers to AlGaN/GaN/AlGaN ultra-violet (UV) light-emitting diodes (LEDs) was suppressed by the use of SiNX passivation layers. Although graphene is considered to be an ideal candidate as the transparent conductive layer to UV-LEDs, oxidation of these layers at high operating temperatures has been an issue. The oxidation is initiated at the un-saturated carbon atoms at the edges of the graphene and reduces the UV light intensity and degrades the current-voltage (I-V) characteristics. The oxidation also can occur at defects, including vacancies. However, GaN-based UV-LEDs deposited with SiNX by plasma-enhanced chemical vapor deposition showed minimal degradation of light output intensity and I-V characteristics because the graphene-based UV transparent conductive layers were shielded from the oxygen molecules. This is a simple and effective approach for maintaining the advantages of graphene conducting layers as electrodes on UV-LEDs.
Droplet microfluidics has recently emerged as a new engineering tool for biochemical analysis of small sample volumes. Droplet generation is most commonly achieved by introducing aqueous and oil phases into a T-junction or a flow focusing channel geometry. This method produces droplets that are sensitive to changes in flow conditions and fluid composition. Here, we present an alternative approach using a simple peristaltic micropump to deliver the aqueous and oil phases in antiphase pulses resulting in a robust "chopping"-like method of droplet generation. This method offers controllable droplet dynamics, with droplet volumes solely determined by the pump design, and is insensitive to liquid properties and flow rates. Importantly, sequences of droplets with controlled composition can be hardcoded into the pump, allowing chemical operations such as titrations and dilutions to be easily achieved. The push-pull pump is compact and can continuously collect samples, generating droplets close to the sampling site and with short stabilisation time. We envisage that this robust droplet generation method is highly suited for continuous in situ sampling and chemical measurement, allowing droplet microfluidics to step out of the lab and into field-deployable applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.