A two-year study of recirculating induction heavy ion accelerators as low-cost driver for inertial-fusion energy applications was recently completed. The projected cost of a 4 MJ accelerator was estimated to be about $500 M (million) and the efficiency was estimated to be 35%. The principal technology issues include energy recovery of the ramped dipole magnets, which is achieved through use of ringing inductive/capacitive circuits, and high repetition rates of the induction cell pulsers, which is accomplished through arrays of field effect transistor (FET) switches. Principal physics issues identified include minimization of particle loss from interactions with the background gas, and more demanding emittance growth and centroid control requirements associated with the propagation of space-charge-dominated beams around bends and over large path lengths. In addition, instabilities such as the longitudinal resistive instability, beam-breakup instability and betatron-orbit instability were found to be controllable with careful design.

No abstract

Abstract--The Lawrence Berkeley National Laboratory has developed a device that measures the water content of wood chips, pulp and brown stock for the paper industry. This device employs a permanent magnet as the central part of a NMR measurement system. This report describes the magnet and the NMR measurement system. The results of water content measurements in wood chips in a magnetic field of 0.47 T are presented.

No abstract

The Lawrence Berkeley National Laboratory (LBNL) has been developing sensors for the pulp and paper industry that uses a magnetic field. The applications for magnetic sensors that have studied include I) sensors for the measurement of the water and ice content of wood chips entering the pulping mm, 2) sensors for measuring the water content and other constituents of the black liquor leaving the paper digester, and 3) sensors for measuring paper thickness and water content as the paper is being processed. These tasks can be done using nuclear magnetic resonance (NMR). The magnetic field used for doing the NMR can come from either permanent magnets or superconducting magnets. The choice of the magnet is dependent on a number of factors, which include the size of the sample and field strength needed to do the sensing task at hand. This paper describes some superconducting magnet options that can be used in the pulp and paper industry.