This paper explains how piezoelectric devices can be used to control vibrations in a snowboard. Furthermore the details of the approach, testing, design and analysis of a piezoelectric damper applied to a production snowboard are described here. The approach consisted of determining the principal modes of vibration of a snowboard during its operation (on-slope). This information was used to develop a finite element model of the structure. The finite element model was used to find the areas of higher strain energy where a piezoelectric device could be applied and be effective in reducing undesired vibrations. Several prototype piezoelectric dampers were built, applied to snowboards and tested on snow. The proper amount of damping was selected by the test riders, so that a configuration could be selected for production of the 1998 K2 Electra snowboard. The piezoelectric damper selected reduced the snowboard vibration by 75% at the mode to which it was tuned, allowing for a smoother ride and a more precise control of the snowboard in any kind of snow condition.