The results of this in vitro study demonstrate that retentive values of the Locator attachments are reduced significantly after multiple pulls. Although this reduction might not be noticeable to the patient, it is recommended that the clinician place and remove the overdenture multiple times before delivery.

Cool Mint Listerine and Efferdent's small effect on the retentive values of the Locators might be clinically unimportant; however, NaOCl caused a large reduction in the retentive values of the attachments. Because of their effect on retentive values and on the color of the Locator attachments, NaOCl and Cool Mint Listerine are not recommended. These results should be interpreted clinically with caution, realizing that different results may be obtained when fatigue stress during function and multiple pulls (in vivo) are combined with the chemical action of denture cleansers.

NaOCl significantly decreased the retentive value of Locators. Therefore, it should not be routinely recommended for use as a denture cleanser. Listerine significantly increased the retention of the Locator attachments; however, it is premature to recommend Listerine for use as a denture cleanser.

It was concluded that time was not a factor in using any of the chairside polishing kits. It is recommended that conventional polishing be used after adjustments to the cameo surface of denture acrylic resin.

High intensity curing lights achieve adequate polymerization of resin cements through veneers in a markedly shorter time period than the conventional halogen light. However, the data in this report indicate that a minimum exposure time of 15 seconds with the Kreativ light and 10 seconds with the Apollo 95E light should be used to polymerize the Variolink II resin, regardless of the composition of the veneer. Conventional halogen lights required a correspondingly greater polymerization time of 60 seconds.