Acid mine drainage (AMD), characterized by low pH and high concentrations of sulfate and heavy metals, is an important and widespread environmental problem related to the mining industry. Sulfate-reducing passive bioreactors have received much attention lately as promising biotechnologies for AMD treatment. They offer advantages such as high metal removal at low pH, stable sludge, very low operation costs, and minimal energy consumption. Sulfide precipitation is the desired mechanism of contaminant removal; however, many mechanisms including adsorption and precipitation of metal carbonates and hydroxides occur in passive bioreactors. The efficiency of sulfate-reducing passive bioreactors is sometimes limited because they rely on the activity of an anaerobic microflora [including sulfate-reducing bacteria (SRB)] which is controlled primarily by the reactive mixture composition. The most important mixture component is the organic carbon source. The performance of field bioreactors can also be limited by AMD load and metal toxicity. Several studies conducted to find the best mixture of natural organic substrates for SRB are reviewed. Moreover, critical parameters for design and long-term operation are discussed. Additional work needs to be done to properly assess the long-term efficiency of reactive mixtures and the metal removal mechanisms. Furthermore, metal speciation and ecotoxicological assessment of treated effluent from on-site passive bioreactors have yet to be performed.

No abstract

This study evaluates different methods to determine points of zero charge (PZCs) on five organic materials, namely maple sawdust, wood ash, peat moss, compost, and brown algae, used for the passive treatment of contaminated neutral drainage effluents. The PZC provides important information about metal sorption mechanisms. Three methods were used: (1) the salt addition method, measuring the PZC; (2) the zeta potential method, measuring the isoelectric point (IEP); (3) the ion adsorption method, measuring the point of zero net charge (PZNC). Natural kaolinite and synthetic goethite were also tested with both the salt addition and the ion adsorption methods in order to validate experimental protocols. Results obtained from the salt addition method in 0.05 M NaNO were the following: 4.72 ± 0.06 (maple sawdust), 9.50 ± 0.07 (wood ash), 3.42 ± 0.03 (peat moss), 7.68 ± 0.01 (green compost), and 6.06 ± 0.11 (brown algae). Both the ion adsorption and the zeta potential methods failed to give points of zero charge for these substrates. The PZC of kaolinite (3.01 ± 0.03) was similar to the PZNC (2.9-3.4) and fell within the range of values reported in the literature (2.7-4.1). As for the goethite, the PZC (10.9 ± 0.05) was slightly higher than the PZNC (9.0-9.4). The salt addition method has been found appropriate and convenient to determine the PZC of natural organic substrates.

No abstract

No abstract