In code-based seismic design and assessment it is often allowed the use of real records as an input for nonlinear dynamic analysis. On the other hand, international seismic guidelines, concerning this issue, have been found hardly applicable by practitioners. This is related to both the difficulty in rationally relating the ground motions to the hazard at the site and the required selection criteria, which do not favor the use of real records, but rather various types of spectrum matching signals. To overcome some of these obstacles a software tool for code-based real records selection was developed. REXEL, freely available at the website of the Italian network of earthquake engineering university labs (http://www.reluis.it/index_eng.html), allows to search for suites of waveforms, currently from the European Strong-motion Database, compatible to reference spectra being either user-defined or automatically generated according to Eurocode 8 and the recently released new Italian seismic code. The selection reflects the provisions of the considered codes and others found to be important by recent research on the topic. In the paper, record selection criteria are briefly reviewed first, and then the algorithms implemented in the software are discussed. Finally, via some examples, it is shown how REXEL can effectively be a contribution to code-based real records selection for seismic structural analysis

The increasing interest in performance-based earthquake engineering has promoted research on the improvement of hazard-consistent seismic input definition and on advanced criteria for strong motion record selection to perform nonlinear time history analyses. Within the ongoing research activities to improve the representation of seismic actions and to develop tools as a support for engineering practice, this study addresses the selection of displacement-spectrum-compatible real ground motions, with special reference to Italy. This involved (1) the definition of specific target displacement spectra for Italian sites, constrained—both at long and short periods—by results of probabilistic seismic hazard analyses; (2) the compilation of a high-quality strong ground motion database; and (3) the development of a software tool for computer-aided displacement-based record selection. Application examples show that sets of unscaled, or lightly scaled, accelerograms with limited record-to-record spectral variability can also easily be obtained when a broadband spectral compatibility is required.

Earthquake early warning (EEW) is a relatively new strategy for reducing disaster risk and increasing resilience to seismic hazard in urban settings. EEW systems provide real-time information about ongoing earthquakes, enabling individuals, communities, governments, businesses and others located at distance to take timely action to reduce the probability of harm or loss before the earthquake-induced ground shaking reaches them. Examples of potential losses mitigated by EEW systems include injuries and infrastructure

The lack of empirical data regarding earthquake damage or losses has propelled the development of dozens of analytical methodologies for the derivation of fragility and vulnerability functions. Each method will naturally have its strengths and weaknesses, which will consequently affect the associated risk estimates. With the purpose of sharing knowledge on vulnerability modeling, identifying shortcomings in the existing methods, and recommending improvements to the current practice, a group of vulnerability experts met in Pavia (Italy) in April 2017. Critical topics related to the selection of ground motion records, modeling of complex real structures through simplified approaches, propagation of aleatory and epistemic uncertainties, and validation of vulnerability results were discussed, and suggestions were proposed to improve the reliability and accuracy in vulnerability modeling.