In this paper, we investigate continuum manipulators that are analogous to conventional rigid-link parallel robot designs. These "parallel continuum manipulators" have the potential to inherit some of the compactness and compliance of continuum robots while retaining some of the precision, stability, and strength of rigid-link parallel robots, yet they represent a relatively unexplored area of the broad manipulator design space. We describe the construction of a prototype manipulator structure with six compliant legs connected in a parallel pattern similar to that of a Stewart-Gough platform. We formulate the static forward and inverse kinematics problems for such manipulators as the solution to multiple Cosserat-rod models with coupled boundary conditions, and we test the accuracy of this approach in a set of experiments, including the prediction of leg buckling. An inverse kinematics simulation of slices through the 6 degree-of-freedom (DOF) workspace illustrates the kinematic mapping, range of motion, and force required for actuation, which sheds light on the potential advantages and tradeoffs that parallel continuum manipulators may bring. Potential applications include miniature wrists and arms for endoscopic medical procedures, and lightweight compliant arms for safe interaction with humans.

No abstract

In this paper, we present the design, construction, and control of a six-degree-of-freedom (DOF), 12 mm diameter, parallel continuum manipulator with a 2-DOF, cable-driven grasper. This work is a proof-of-concept first step towards miniaturization of this type of manipulator design to provide increased dexterity and stability in confined-space surgical applications, particularly for endoscopic procedures. Our robotic system consists of six superelastic NiTi (Nitinol) tubes in a standard Stewart-Gough configuration and an end effector with 180 degree motion of its two jaws. Two Kevlar cables pass through the centers of the tube legs to actuate the end effector. A computationally efficient inverse kinematics model provides low-level control inputs to ten independent linear actuators, which drive the Stewart-Gough platform and end-effector actuation cables. We demonstrate the performance and feasibility of this design by conducting open-loop range-of-motion tests for our system.