No abstract

No abstract

Methods have been devised for the formation of monodisperse polystyrene latices in the absence of added surface active agents. The particles are stabilised, as a colloidal dispersion, by surface groupings which are an integral part of the particle and are not removed by dialysis. By suitable variation of the ionic strength of the aqueous phase, the initiator concentration and the polymerisation temperature, the final particle size obtained in single‐stage reactions was varied between c. 0.15 and 1.0 μm. The coefficient of variation on particle diameters was usually less than 5%. The ionic strength of the aqueous phase was found to play an important part in determining particle size; this was explained in terms of a limited coagulation process occurring at the stage involving the nucleation of polymer particles. Conductometric titration experiments revealed the presence of sulphate, carboxyl and hydroxyl groups on the particle surfaces. Molecular weight determination of the polystyrene formed showed that this was lower than that formed in conventional emulsion polymerisation.

Starting with monodisperse spherical polystyrene particles ranging in diameter from 208 nm to 3.90 μm, a series of ellipsoidal particles have been prepared by a previously published stretching technique. Both spherical and ellipsoidal particles were examined by microelectrophoresis. The electrophoretic mobilities so obtained were converted into ζ-potential values using the Smoluchowski equation and an equation obtained by O'Brien and Ward from an analysis of the electrophoretic motion of spheroidal particles.

An improved version of a novel method first employed by Nagy & Keller for the preparation of monodisperse ellipsoidal polystyrene latex particles is described. The method involves embedding monodisperse spherical polystyrene latex particles as starting material in a deformable polymer matrix such as poly(vinyl alcohol) and deforming these mechanically to various predetermined macroscopic draw ratios to give ellipsoids of various axial ratios. Ellipsoids with lengths ranging from about 350 to 12250nm were prepared. Stable aqueous dispersions of these were recovered and characterised with respect to particle size and axial ratio distributions and surface morphology using electron microscopy. Axial ratios ranging from 2.0 to 5.65 were obtained for the resulting ellipsoids. Various factors influencing the monodispersity of the resulting ellipsoids in the preparation method are discussed.