No abstract

Most of the existing research on cement slurry materials are not environmentally friendly and environmental pollution is significant. Most researchers only test its performance, but do not conduct engineering feasibility verification. In this study, the materials extracted from various wastes were used to replace part of the sulfoaluminate cement, and orthogonal experiments were designed to analyze the reaction mechanism between different materials. Finally, the optimal mixing ratio was obtained. Then, through the regression equation analysis method, digital photograph restoration technology, the finite element method and various practical engineering conditions, the feasibility of the slurry under different applicable engineering conditions was compared and analyzed. The comparison between the experimental and numerical simulation results shows that the cement slurry obtained in this study has good reliability and feasibility. It can carry out rapid grouting reinforcement. The results of this study not only provide a feasible and environmentally friendly cement slurry for a wide range of construction projects, but also provide an effective method for the treatment of various wastes.

Ordinary cement is not environmentally friendly, has high cost and lacks superior performance. Many scholars use various admixtures to adjust the properties of cement slurry, but admixtures are usually not environmentally friendly, and it is difficult to ensure that the properties after deployment meet engineering requirements. In this study, a variety of admixtures were obtained using the environmental protection method, and the optimal mixing ratio was analyzed by combining the entropy weight method and the Taguchi grey relational analysis method. The developed cement slurry was compared with conventional slurry from both macroscopic and microscopic aspects. Aiming at the problem that previous scholars lacked the engineering feasibility verification of the developed slurry, this study combined the constitutive equation regression analysis method, discrete element numerical simulation and other methods to study various actual engineering conditions. The results show that the optimal mix ratio of silica fume cement slurry has good permeability characteristics under the conditions of different roughness, grouting pressure and confining pressure. At the same time, under different geological temperatures and different erosive liquid states, the cement slurry stone body shows good properties of reinforcement materials.

No abstract