Polylactide (PLA) is known as one of the most promising biopolymers as it is derived from renewable feedstock and can be biodegraded. During the last two decades, it moved more and more into the focus of scientific research and industrial use. It is even considered as a suitable replacement for standard petroleum-based polymers, such as polystyrene (PS), which can be found in a wide range of applications—amongst others in foams for packaging and insulation applications—but cause strong environmental issues. PLA has comparable mechanical properties to PS. However, the lack of melt strength is often referred to as a drawback for most foaming processes. One way to overcome this issue is the incorporation of chemical modifiers which can induce chain extension, branching, or cross-linking. As such, a wide variety of substances were studied in the literature. This work should give an overview of the most commonly used chemical modifiers and their effects on rheological, thermal, and foaming behavior. Therefore, this review article summarizes the research conducted on neat and chemically modified PLA foamed with the conventional foaming methods (i.e., batch foaming, foam extrusion, foam injection molding, and bead foaming).

We aimed to evaluate the value of sentinel lymph node contrast-enhanced ultrasound (SLN-CEUS) and surface tracing for the biopsy of intra-operative sentinel lymph nodes (SLNs). Between June 2015 and December 2017, a total of 453 patients with early invasive breast cancer were recruited. Patients received an intradermal injection of microbubble contrast agent around the areola on the day before surgery. The locations and sizes of lymphatic channels (LCs) and SLNs were marked on the body surface using gentian violet. Then, injection of double blue dye was performed half an hour before surgery. We compared the pathway of LCs and the location of SLNs obtained from SLN-CEUS and blue dye during surgery. Among the 453 patients, the mean numbers of LCs and SLNs detected by SLN-CEUS were 1.42 and 1.72, respectively, and the coincidence rate was 98.2% compared with blue dye during surgery. The median distance from the SLN to skin measured by preoperative CEUS and blue dye was 1.95 § 0.69 and 2.03 § 0.87 cm (p = 0.35). There were three SLN enhancement in our research, including homogeneous enhancement, inhomogeneous enhancement and no enhancement, with the sensitivity, specificity, positive predictive value and negative predictive value of SLN-CEUS for the diagnosis of SLNs being 96.82%, 91.91%, 87.54% and 98.01%, respectively. SLN-CEUS with skin marking can identify the pathway of LCs and the location of the SLN before surgery, measure the distance from the SLN to skin and determine if the SLN is metastatic. SLN-CEUS can be used as an effective complement to the blue dye method.

Thin films containing metal nanohole arrays can be fabricated with high precision, and regular, tunable features via colloidal lithography. They are ideal model structures to study the relation between structural design and optoelectronic properties, for example as transparent, conducting electrodes, where the percolation threshold sets an upper limit on the achievable transparency. An important, but less systematically studied property of transparent conductive electrodes is the amount of scattered light, as described by the haze factor. Here, the influence of structural parameters on the resulting haze factor of metal nanohole array films is investigated. It is found that transmission, transparency, and haze factor cannot be independently controlled, and propose a new fabrication paradigm to optimize the optoelectronic properties of such films. Hierarchical metal micro/nanohole array films are designed, which combine precisely controlled and highly regular structural features at two length scales. These hierarchical structures maximize transparency while simultaneously providing low haze factors. Computer simulations based on finite elements and ray optics are in close agreement with the experimental results and reveal that the reduced haze factor results from a drastic decrease of grating diffraction efficiency in the hierarchical films.

No abstract