No abstract

This paper presents preliminary field observations on the performance of selected steel structures in Christchurch during the earthquake series of 2010 to 2011. This comprises 6 damaging earthquakes, on 4 September and 26 December 2010, February 22, June 6 and two on June 13, 2011. Most notable of these was the 4 September event, at Ms7.1 and MM7 (MM as observed in the Christchurch CBD) and most intense was the 22 February event at Ms6.3 and MM9-10 within the CBD. Focus is on performance of concentrically braced frames, eccentrically braced frames, moment resisting frames and industrial storage racks. With a few notable exceptions, steel structures performed well during this earthquake series, to the extent that inelastic deformations were less than what would have been expected given the severity of the recorded strong motions. Some hypotheses are formulated to explain this satisfactory performance.

No abstract

No abstract

This paper describes the effect of composite slabs in increasing beam strength and its implications for design. It also discusses the "beam-growth" phenomena, which can detrimentally influence the performance of a frame with reinforced concrete or precast concrete beams, and its impact on steel beams with RC slabs. From the subassembly testing conducted the slab increased the beam strength by around 40%. However the slab could not maintain strength at large drifts without degradation with transverse or longitudinal decking placed around the columns. This indicates that while transverse or longitudinal slabs should not be considered in design to size the beam, they should be considered in the beam overstrength calculations for the design of other members. Also, both rational considerations and experimental results