Dielectric barrier discharge (DBD)-based analytical applications have experienced rapid development in recent years. DBD designs and parameters and the application they are used for can vary considerably. This leads to a diverse field with many apparently unique systems that are all based on the same physical principle. The most significant changes among DBDs used for chemical analysis are in how the discharge electrodes are separated from the ignited discharge gas. While the official definition of a DBD states that at least one electrode has to be covered by a dielectric to be considered a DBD, configurations with both electrodes covered by dielectric layers can also be realized. The electrode surface plays a major role in several plasma-related technical fields, surface treatment or sputtering processes, for example, and has hence been studied in great detail. Analytical DBDs are often operated at low power and atmospheric pressure, making a direct transfer of insight and know-how gained from the aforementioned well-studied fields complicated. This work focuses on comparing two DBD configurations: the low temperature plasma probe (LTP) and the dielectric barrier discharge for soft ionization (DBDI). The LTP is representative of a DBD with one covered electrode and the DBDI of a design in which both electrodes are covered. These two configurations are well suited for a systematic comparison due to their similar geometric designs based on a dielectric capillary.

The absolute number densities of helium atoms in the 2s 3 S 1 metastable state were determined in four plasma-based ambient desorption/ionization sources by atomic absorption spectroscopy. The plasmas included a high-frequency dielectric barrier discharge (HF-DBD), a low temperature plasma (LTP), and two atmospheric-pressure glow discharges, one with AC excitation and the other with DC excitation. Peak densities in the luminous plumes downstream from the discharge capillaries of the HF-DBD and the LTP were 1.39 × 10 12 cm-3 and 0.011 × 10 12 cm-3 , respectively. Neither glow discharge produced a visible afterglow, and no metastable atoms were detected downstream from the capillary exits. However, densities of 0.58 × 10 12 cm ˗3 and 0.97 × 10 12 cm-3 were measured in the interelectrode regions of the AC and DC glow discharges, respectively. Time-resolved measurements of metastable atom densities revealed significant random variations in the timing of pulsed absorption signals with respect to the voltage waveforms applied to the discharges.

A new model of a plasma ionization source anchored by experimental data giving a comprehensive view of the discharge mechanism.