A voltage-controlled oscillator (VCO) is a key component to generate high-speed clock of mixed-mode circuits and local oscillation signals of the frequency conversion in wired and wireless application systems. In particular, the recent evolution of new high-speed wireless systems in the millimeter-wave frequency band calls for the implementation of the VCO with high oscillation frequency and low close-in phase noise. The effect of the flicker noise on the phase noise of the VCO should be minimized because the flicker noise dramatically increases as the deep-submicron complementary metal-oxide-semiconductor (CMOS) process is scaled down, and the flicker corner frequency also increases, up to several MHz, in the up-to-date CMOS process. The flicker noise induced by the current source is a major factor affecting the phase noise of the VCO. Switched-biasing techniques have been proposed to minimize the effect of the flicker noise at the output of the VCO with biasing AC-coupled signals at the current source of the VCO. Reviewing the advantages and disadvantages reported in the previous studies, it is analyzed which topology to implement the switched-biasing technique is advantageous for improving the performance of the CMOS VCOs.