No abstract

Tumor resection is widely used to prevent tumor growth. However, the defected tissue at the original tumor site also causes tissue or organ dysfunction which lowers the patient’s life quality. Therefore, regenerating the tissue and preventing tumor recurrence are highly important. Herein, according to the concept of ‘first kill and then regenerate’, a versatile scaffold-based tissue engineering strategy based on cryogenic 3D printing of water-in-oil polyester emulsion inks, containing multiple functional agents, was developed, in order to realize the elimination of tumor cells with recurrence suppression and improved tissue regeneration sequentially. To illustrate our strategy, water/poly(lactic-co-glycolic acid)/dichloromethane emulsions containing β-tricalcium phosphate (β-TCP), 2D black phosphorus (BP) nanosheets, low-dose doxorubicin hydrochloride (DOX) and high-dose osteogenic peptide were cryogenically 3D printed into hierarchically porous and mechanically strong nanocomposite scaffolds, with multiple functions to treat bone tumor, resection-induced tissue defects. Prompt tumor ablation and long-term suppression of tumor recurrence could be achieved due to the synergistic effects of photothermotherapy and chemotherapy, and improved bone regeneration was obtained eventually due to the presence of bony environment and sustained peptide release. Notably, BP nanosheets in scaffolds significantly reduced the long-term toxicity phenomenon of released DOX during in vivo bone regeneration. Our study also provides insights for the design of multi-functional tissue engineering scaffolds for treating other tumor resection-induced tissue defects.

Rechargeable lithium–sulfur batteries have attracted tremendous scientific attention owing to their high energy density. However, their practical application is greatly hindered by the notorious shuttling of soluble lithium polysulfide (LPS) intermediates with sluggish redox reactions and uncontrolled precipitation behavior. Herein, we report a semiliquid cathode composed of an active LPS solution/carbon nanofiber (CNF) composite layer, capped with a carbon nanotube (CNT) thin film decorated with metallic Mo nanoclusters that regulate the electrochemical redox reactions of LPS. The trace amount (0.05 mg cm–2) of metallic Mo on the CNT film provides sufficient capturing centers for the chemical immobilization of LPS. Together with physical blocking of LPS by the compact CNT film, free diffusion of LPS is significantly restrained and the self-discharge behavior of the Li–S cell is thus effectively suppressed. Importantly, the metallic Mo nanoclusters enable fast catalytic conversion of LPS and regular deposition of lithium sulfide. As a result, the engineered cathode exhibits a high active sulfur utilization (1401 mAh g–1 at 0.1 C), stable cycling (500 cycles at 1 C with 0.06% decay per cycle), high rate performance (694 mAh g–1 at 5 C), and low self-discharge rate (3% after 72 h of rest). Moreover, a high reversible areal capacity of 4.75 mAh cm–2 is maintained after 100 cycles at 0.2 C for a cathode with a high sulfur loading of 7.64 mg cm–2. This work provides significant insight into the structural and materials design of an advanced sulfur-based cathode that effectively regulates the electrochemical reactions of sulfur species in high-energy Li–S batteries.

No abstract