No abstract

Solar irradiance nowcasts can be derived with sky images from all sky imagers (ASI) by detecting and analyzing transient clouds, which are the main contributor of intra-hour solar irradiance variability. The accuracy of ASI based solar irradiance nowcasting systems depends on various processing steps. Two vital steps are the cloud height detection and cloud tracking. This task is challenging, due to the atmospheric conditions that are often complex, including various cloud layers moving in different directions simultaneously. This challenge is addressed by detecting and tracking individual clouds. For this, we developed two distinct ASI nowcasting approaches with four or two cameras and a third hybridized approach. These three systems create individual 3-D cloud models with unique attributes 2 including height, position, size, optical properties and motion. This enables us to describe complex multi-layer conditions. In this paper, derived cloud height and motion vectors are compared with a reference ceilometer (height) and shadow camera system (motion) over a 30 day validation period. The validation data set includes a wide range of cloud heights, cloud motion patterns and atmospheric conditions. Furthermore, limitations of ASI based nowcasting systems due to image resolution and image perspective constrains are discussed. The most promising system is found to be the hybridized approach. This approach uses four ASIs and a voxel carving based cloud modeling combined with a cloud segmentation independent stereoscopic cloud height and tracking detection. We observed for this approach an overall mean absolute error of 648 m for the height, 1.3 m/s for the cloud speed and 16.2° for the motion direction.

International audienceBecause of the cloud-induced variability of the solar resource, the growing contributions of photovoltaic plants to the overall power generation challenges the stability of electricity grids. To avoid blackouts, administrations started to define maximum negative ramp rates. Storages can be used to reduce the occurring ramps. Their required capacity, durability, and costs can be optimized by nowcasting systems. Nowcasting systems use the input of upward-facing cameras to predict future irradiances. Previously, many nowcasting systems were developed and validated. However, these validations did not consider aggregation effects, which are present in industrial-sized power plants. In this paper, we present the validation of nowcasted global horizontal irradiance (GHI) and direct normal irradiance maps derived from an example system consisting of 4 all-sky cameras (“WobaS-4cam”). The WobaS-4cam system is operational at 2 solar energy research centers and at a commercial 50-MW solar power plant. Besides its validation on 30 days, the working principle is briefly explained. The forecasting deviations are investigated with a focus on temporal and spatial aggregation effects. The validation found that spatial and temporal aggregations significantly improve forecast accuracies: Spatial aggregation reduces the relative root mean square error (GHI) from 30.9% (considering field sizes of 25 m2) to 23.5% (considering a field size of 4 km2) on a day with variable conditions for 1 minute averages and a lead time of 15 minutes. Over 30 days of validation, a relative root mean square error (GHI) of 20.4% for the next 15 minutes is observed at pixel basis (25 m2). Although the deviations of nowcasting systems strongly depend on the validation period and the specific weather conditions, the WobaS-4cam system is considered to be at least state of the art

International audienceHighly spatially and temporally resolved solar irradiance maps are of special interest for predicting ramp rates and for optimizing operations in solar power plants. Irradiance maps with lead times between 0 and up to 30 min can be generated using all-sky imager based nowcasting systems or with shadow camera systems. Shadow cameras provide photos of the ground taken from an elevated position below the clouds. In this publication, we present a shadow camera system, which provides spatially resolved Direct Normal Irradiance (DNI), Global Horizontal Irradiance (GHI) and Global Tilted Irradiance (GTI) maps. To the best of our knowledge, this is the first time a shadow camera system is achieved. Its generated irradiance maps have two purposes: (1) The shadow camera system is already used to derive spatial averages to benchmark all-sky imager based nowcasting systems. (2) Shadow camera systems can potentially provide spatial irradiance maps for plant operations and may act as nowcasting systems. The presented shadow camera system consists of six cameras taking photos from the top of an 87 m tower and is located at the Plataforma Solar de Almería in southern Spain. Out of six photos, an ortho-normalized image (orthoimage) is calculated. The orthoimage under evaluation is compared with two reference orthoimages. Out of the three orthoimages and one additional pyranometer and pyrheliometer, spatially resolved irradiance maps (DNI, GHI, GTI) are derived. In contrast to satellites, the shadow camera system uses shadows to obtain irradiance maps and achieves higher spatial and temporal resolutions. he preliminary validation of the shadow camera system, conducted in detail on two example days (2015-09-18, 2015-09-19) with 911 one-minute averages, shows deviations between 4.2% and 16.7% root mean squared errors (RMSE), 1.6% and 7.5% mean absolute errors (MAE) and standard deviations between 4.2% and 15.4% for DNI maps calculated with the derived approach. The GHI maps show deviations below 10% RMSE, between 2.1% and 7.1% MAE and standard deviations between 3.2% and 7.9%. Three more days (2016-05-11, 2016-09-01, 2016-12-09) are evaluated, briefly presented and show similar deviations. These deviations are similar or below all-sky imager based nowcasts for lead time zero minutes. The deviations are small for photometrically uncalibrated, low-cost and off-the-shelf surveillance cameras, which is achieved by a segmentation approach

International audienceNowcasting of high resolution maps of direct normal irradiance (DNI) is of interest to efficiently operate Concentrated Solar Power plants. The paper presents a state-of-the-art and innovative methodology, developed in the framework of the FP7 DNICast project, to derive nowcasting of DNI maps from fish-eye cameras in stereoscopic mode. This methodology has been applied at the Plataforma Solar de Almeria: fish-eye cameras at distances from each other between 500 m and 900 m have been used in stereoscopic mode to produce nowcasted 1-min time series of decametric DNI maps