Catalytic reduction of water contaminants using palladium (Pd)-based catalysts and hydrogen gas as a reductant has been extensively studied at the bench-scale, but due to technical challenges it has only been limitedly applied at the field-scale. To motivate research that can overcome these technical challenges, this review critically analyzes the published research in the area of Pd-based catalytic reduction of priority drinking water contaminants (i.e., halogenated organics, oxyanions, and nitrosamines), and identifies key research areas that should be addressed. Specifically, the review summarizes the state of knowledge related to (1) proposed reaction pathways for important classes of contaminants, (2) rates of contaminant reduction with different catalyst formulations, (3) long-term sustainability of catalyst activity with respect to natural water foulants and regeneration strategies, and (4) technology applications. Critical barriers hindering implementation of the technology are related to catalyst activity (for some contaminants), stability, fouling, and regeneration. New developments overcoming these limitations will be needed for more extensive field-scale application of this technology.

Equilibrium sorption isotherms were measured for five different low-polarity organic compounds (benzene, trichloroethene, 1,2- and 1,4-dichlorobenzene, and phenanthrene) over a wide concentration range. The investigated sorbents can be grouped into the following three classes: (1) humic soil organic matter, which shows linear sorption isotherms (solely partitioning, as observed in the peat sample); (2) carbon materials, which were thermally altered (due to their natural history or industrial production) and thus contain a high specific surface area and exhibit nonlinear isotherms, and (3) pure engineered microporous materials (e.g., zeolites and activated carbon), where adsorption is solely due to a pore-filling process. Sorption of all compounds was fitted very well by the Polanyi-Dubinin-Manes (PDM) model, which for sorbents containing humic organic matter (e.g., peat) was combined with linear partitioning. Both the partitioning and the Polanyi-Dubinin-Manes model predict unique sorption isotherms of similar compounds if the solubility-normalized aqueous concentration is used. In addition, an inverse linear relationship between the distribution coefficient (Kd) and water solubility, which was very well confirmed by the data, is obtained. This also leads to unit-equivalent Freundlich sorption isotherms and explains the often observed apparent correlation between sorption capacity at a given concentration (e.g., Freundlich coefficient) and sorption nonlinearity (Freundlich exponent).

No abstract

A simple, quick and sensitive method for the compound-specific stable chlorine isotope analysis of chlorinated solvents by conventional quadrupole gas chromatography/mass spectrometry (GC/MS) is presented. With this method, compound-specific stable chlorine isotope ratios of typical chlorinated solvents like tetrachloroethene (PCE) and trichloroethene (TCE) can be determined quantitatively within 30 min by direct injection. The chlorine isotope ratios of target substances are calculated from the peak areas of several selected molecular ions and fragment ions of the substances, using a set of unique mathematical equations. The precision of the method was demonstrated through reproducibility tests. An internal precision of +/-0.4 per thousand to +/-1.1 per thousand was obtained when analyzing PCE and TCE in the 10-1000 pmol range. The validity of the method was further demonstrated by determining the chlorine isotopic fractionation factor during the reductive dechlorination of TCE in a batch experiment using zero-valent iron. The chlorine isotopic fractionation factor was calculated as 0.9976 +/- 0.0011 with a correlation coefficient of 0.9469 (n = 38). The high correlation coefficient indicates that compound-specific stable chlorine isotope analysis can be performed with sufficient accuracy using conventional quadrupole GC/MS when significant fractionation takes place during a reaction. For the first time, the chlorine isotope fractionation factor of TCE during an abiotic anaerobic dechlorination process was determined using quadrupole GC/MS, without offline sample preparation.

[1] Groundwater and surface water are in many cases closely linked components of the water cycle with respect to both quantity and quality. Bank filtrates may eventually be impacted by the infiltration of wastewater-derived micropollutants from surface waters. Artificial sweeteners such as acesulfame have recently been reported as a novel class of potentially valuable tracers to study the fate of wastewater-derived substances in groundwater and, in particular, to determine the (bio)degradability of micropollutants. In this paper, a model-based analysis of a field experiment within the hyporheic and riparian zone of a highly polluted German stream was performed to assess the physical and chemical behavior of the artificial sweetener acesulfame. In the first part of this study, a reliable flow and transport model was established by jointly using hydraulic heads, temperatures, and acesulfame concentrations as inverse model calibration constraints. The analysis confirmed the conservative behavior of acesulfame and, therefore, its usability as an indicator of sewage flux provenance. However, a comparison of the appropriateness of hydraulic head, temperature, and acesulfame concentrations revealed that the characterization of the surface water-groundwater flux data indicated diurnal temperature fluctuations are the best indicator in terms of characterizing the flow and transport behavior in the groundwater system.