Nanostructured surfaces are common in nature and exhibit properties such as antireflectivity (moth eyes), self-cleaning (lotus leaf), iridescent colors (butterfly wings), and water harvesting (desert beetles). We now understand such properties and can mimic some of these natural structures in the laboratory. However, these synthetic structures are limited since they are not easily mass produced over large areas due to the limited scalability of current technologies such as UV-lithography, the high cost of infrastructure, and the difficulty in nonplanar surfaces. Here, we report a solution process based on block copolymer (BCP) self-assembly to fabricate subwavelength structures on large areas of optical and curved surfaces with feature sizes and spacings designed to efficiently scatter visible light. Si nanopillars (SiNPs) with diameters of ∼115 ± 19 nm, periodicity of 180 ± 18 nm, and aspect ratio of 2-15 show a reduction in reflectivity by a factor of 100, <0.16% between 400 and 900 nm at an angle of incidence of 30°. Significantly, the reflectivity remains below 1.75% up to incident angles of 75°. Modeling the efficiency of a SiNP PV suggests a 24.6% increase in efficiency, representing a 3.52% (absolute) or 16.7% (relative) increase in electrical energy output from the PV system compared to AR-coated device.

Since the isolation of two-dimensional (2D) phosphorene, black phosphorus (BP) has gained popularity due to its high carrier mobility and tunable bandgap. Poor ambient stability of BP remains a key issue and impedes its use in electronic applications. Here we report a new stabilization strategy based on covalent functionalization of liquid exfoliated few-layer BP using aryl iodonium salts. Arylation of BP using iodonium salts enables covalent modification without inducing oxidation and alters the degradation chemistry of BP by inhibiting bridged oxygen formation through attachment to surface oxygen sites. In comparison, functionalization using aryl diazonium salts results in oxidation and aryl multilayer formation and does not adequately disrupt noncovalent solvent passivation. Aryl functionalization of BP using iodonium salts displays superior ambient stability compared to arylation using diazonium salts associated with greater covalent functionalization as characterized using X-ray photoelectron spectroscopy, scanning transmission electron microscopy, photoluminescence, and attenuated total reflectance infrared spectroscopy.

A comprehensive review of recent advances in solution processing and growth of metal‐oxide thin films for electronic and photonic devices is presented, with specific focus on precise solution‐based technological coatings for electronics and optics, and new concepts for oxide material growth for electrochemical, catalytic, energy storage and conversion systems, information technology, semiconductor device processing and related devices. Throughout, the nature of the soluble precursors solutions and their relationship to film formation process by various solution coating techniques are collated and compared, highlighting advantages in precursor design for creating complex oxides for devices. Because of the versatility of solution‐processable oxides and functional material coating, it is important to capture the advances made in oxide deposition for plastic electronics, see‐through and wearable devices, and high‐fidelity thin film transistors on curved or flexible displays. Solution processing, even for oxides, allows control over composition, thickness, optical constants, porosity, doping, tunable optical absorbance/transmission, band structure engineering, 3D‐substrate coating, complex composite oxide formation and multi‐layered oxide systems that are more difficult to achieve using chemical vapor deposition (CVD) or atomic layer deposition (ALD) processes. We also discuss limitations of solution processing for some technologies and comment on the future of solution‐based processing of metal‐oxide materials for electronics, photonics and other technologies.

Energy Autonomous Wearable Sensors (EAWS) have attracted a large interest due to their potential to provide reliable measurements and continuous bioelectric signals, which help to reduce health risk factors early on, ongoing assessment for disease prevention, and maintaining optimum, lifelong health quality. This review paper presents recent developments and state-of-the-art research related to three critical elements that enable an EAWS. The first element is wearable sensors, which monitor human body physiological signals and activities. Emphasis is given on explaining different types of transduction mechanisms presented, and emerging materials and fabrication techniques. The second element is the flexible and wearable energy storage device to drive low-power electronics and the software needed for automatic detection of unstable physiological parameters. The third is the flexible and stretchable energy harvesting module to recharge batteries for continuous operation of wearable sensors. We conclude by discussing some of the technical challenges in realizing energy-autonomous wearable sensing technologies and possible solutions for overcoming them.