We show that standard silicon nitride cantilevers can be used for tapping mode atomic force microscopy (AFM) in air, provided that the energy of the oscillating cantilever is sufficiently high to overcome the adhesion of the water layer. The same cantilevers are successfully used for tapping mode AFhif in liquid. Acoustic modes in the liquid excite the canti1eve.r. On soft samples, e.g., biological material, this tapping mode AFM is much more gentle than the regular contact mode AFM. Not only is the destructive infuence of the lateral forces minimized, but more important, the intrinsic viscoelastic properties of the sample itself are effectively used to "harden" the soft sample.

Application of atomic force microscopy (AFM) to biological objects and processes under physiological conditions has been hampered so far by the deformation and destruction of the soft biological materials invoked. Here we describe a new mode of operation in which the standard V-shaped silicon nitride cantilever is oscillated under liquid and damped by the interaction between AFM tip and sample surface. Because of the viscoelastic behavior of the cellular surface, cells effectively "harden" under such a tapping motion at high frequencies and become less susceptible to deformation. Images obtained in this way primarily reveal the surface structure of the cell. It is now possible to study physiological processes, such as cell growth, with a minimal level of perturbation and high spatial resolution (approximately 20 nm).

A Michelson interferometer and an optical beam deflection configuration (both shot noise and diffraction limited) are compared for application in an atomic force microscope. The comparison shows that the optical beam deflection method and the interferometer have essentially the same sensitivity. This remarkable result is explained by indicating the physical equivalence of both methods. Furthermore, various configurations using optical beam deflection are discussed. All the setups are capable of detecting the cantilever displacements with atomic resolution in a 10 kHz bandwidth.-')To whom correspondence should be directed.

A simple modification of a commercial atomic force microscopy liquid cell for in situ imaging in organic, reactive, or air sensitive environments Rev.

No abstract