No abstract

For electrocatalytic water splitting, the sluggish anodic oxygen evolution reaction (OER) restricts the cathodic hydrogen evolution reaction (HER). Therefore, developing an alternative anodic reaction with accelerating kinetics to produce value-added chemicals, especially coupled with HER, is of great importance. Now, a thermodynamically more favorable primary amine (-CH -NH ) electrooxidation catalyzed by NiSe nanorod arrays in water is reported to replace OER for enhancing HER. The increased H production can be obtained at cathode; meanwhile, a variety of aromatic and aliphatic primary amines are selectively electrooxidized to nitriles with good yields at the anode. Mechanistic investigations suggest that Ni /Ni may serve as the redox active species for the primary amines transformation. Hydrophobic nitrile products can readily escape from aqueous electrolyte/electrode interface, avoiding the deactivation of the catalyst and thus contributing to continuous gram-scale synthesis.

oxygen evolution reaction or OER) processes. [1][2][3][4][5] To avoid the use of costly noble metal catalysts, nitrogen-doped porous carbon materials are proposed as the electrode materials in these batteries since they can be derived from naturally abundant biomass. The performance of these porous carbon materials as electrodes depends on the chemistry that results in the generation of OER-active pyridinic N and ORR-active quaternary N groups in a high density as well as the porosity of the materials. [6] This is because these factors determine the extent of exposure of the active sites to the relevant chemical species such as O 2 , OH − , and H 2 O and help prevent the rapid clogging of the planar electrode surface. [7][8][9][10] SiO 2 [8,11,12] and Al 2 O 3[13] microbeads have been employed widely as templates for generating nanopores in carbon-based catalysts. However, this requires multiple steps such as the bottom-up synthesis of the catalysts from carbon precursors as well as etching and purification processes to remove the templates, which increases the cost for mass production. [14][15][16][17][18] In addition, porous carbon materials synthesized by bottom-up methods are generally in the powder form and are thus not self-supporting. Thus, the fabrication of air electrodes requires an additional process, wherein the powder carbon materials are electrosprayed onto carbon cloth/paper, which then lead to the inevitable decreases Porous carbon electrodes have emerged as important cathode materials for metal-air battery systems. However, most approaches for fabricating porous carbon electrodes from biomass are highly energy inefficient as they require the breaking down of the biomass and its subsequent reconstitution into powder-like carbon. Here, enzymes are explored to effectively hydrolyze the partial cellulose in bulk raw wood to form a large number of nanopores, which helps to maximally expose the inner parts of the raw wood to sufficiently dope nitrogen onto the carbon skeletons during the subsequent pyrolysis process. The resulting carbons exhibit excellent catalytic activity with respect to the oxygen reduction and oxygen evolution reactions. As-fabricated cellulosedigested, carbonized wood plates are mechanically strong, have high conductivity, and contain a crosslinked network and natural ion-transport channels and can be employed directly as metal-free electrodes without carbon paper, polymer binders, or carbon black. When used as metal-free cathodes in zincair batteries, they result in a specific capacity of 801 mA h g −1 and an energy density of 955 W h kg −1 with the long-term stability of the batteries being as high as 110 h. This work paves the way for the ready conversion of abundant biomass into high-value engineering products for energy-related applications.The ORCID identification number(s) for the author(s) of this article can be found under https://doi.org/10.1002/adma.201900341.Rechargeable Zn-air batteries have emerged as a promising technology for coping with future energy demands owin...

Porous materials such as covalent organic frameworks (COFs) are good candidates for molecular sieves due to the chemical diversity of their building blocks, which allows fine-tuning of their chemical and physical properties by design. Tailored synthesis of inherently functional building blocks can generate framework materials with chemoresponsivity, leading to controllable functionalities such as switchable sorption and separation. Herein, we demonstrate a chemoselective, salicylideneanilines-based COF (SA-COF), which undergoes solvent-triggered tautomeric switching. This is unique compared to solid-state salicylideneanilines' counterpart, which typically requires high energy input such as photo or thermal activation to trigger the enol-keto tautomerisim and cis-trans isomerization. Accompanying the tautomerization, the ionic properties of the COF can be tuned reversibly, thus forming the basis of size-exclusion, selective ionic binding or chemoseparation in SA-COF demonstrated in this work.