We have combined a stand-alone Bi2Sr2CaCu2O8 intrinsic Josephson junction stack, emitting terahertz radiation, with a YBa2Cu3O7 grain boundary Josephson junction acting as detector. The detector is mounted on a lens, positioned 1.2 cm away from the emitter on a similar lens. With the emitter radiating at 0.5 THz, we observed up to 7 Shapiro steps on the current-voltage characteristic of the detector. The ac current induced in this junction was 0.9 mA, and the dissipated power was 1.8 μW. The setup, although far from being optimized, may be considered as a first step towards an integrated high-Tc receiver.

We report on Bi 2 Sr 2 CaCu 2 O 8 (BSCCO) intrinsic Josephson junction stacks with improved cooling, allowing for a remarkable increase in emission frequency compared to the previous designs. We started with a BSCCO stack embedded between two gold layers. When mounted in the standard way to a single substrate, the stack emits in the range of 0.43-0.82 THz. We then glued a second, thermally anchored substrate onto the sample surface. The maximum voltage of this better cooled and dimension-unchanged sample was increased and, accordingly, both the emission frequencies and the tunable frequency range were significantly increased up to 1.05 THz and to 0.71 THz, respectively. This double sided cooling may also be useful for other "hot" devices, e.g., quantum cascade lasers. V C 2014 AIP Publishing LLC. [http://dx.

We used one-dimensional coupled sine-Gordon equations combined with heat diffusion equations to numerically investigate the thermal and electromagnetic properties of a 300 µm long intrinsic Josephson junction stack consisting of N = 700 junctions. The junctions in the stack are combined to M segments where we assume that inside a segment all junctions behave identically. Most simulations are for M = 20. For not too high bath temperatures there is the appearence of a hot spot at high bias currents. In terms of electromagnetic properties, robust standing wave patterns appear in the current density and electric field distributions. These patterns come together with vortex/antivortex lines across the stack that correspond to π kink states, discussed before in the literature for a homogeneous temperature distribution in the stack. We also discuss scaling of the thermal and electromagnetic properties with M , on the basis of simulations with M between 10 and 350.