Calcium phosphate-based (CaP) bioceramic materials are widely used in the field of bone regeneration, both in orthopaedics and in dentistry, due to their good biocompatibility, osseointegration and osteoconduction. The formation of CaP coatings on high-strength implant materials such as titanium alloys combines the superior mechanical properties of metals with the osteoconductive properties of CaP materials. In this work, the electrochemically assisted deposition of CaP coatings on the titanium alloy, TiAlNb, which is commonly used commercially as an implant material in orthopaedic devices, was examined. The barrier properties (electronic properties) of unmodified and CaP-modified titanium alloy were tested in situ in a simulated physiological solution, Hanks’ solution, under in vitro conditions of real implant applications using electrochemical impedance spectroscopy (EIS). The morphology and microstructure of the obtained CaP deposit were characterised by scanning electron microscopy (SEM) and chemical composition was assessed by energy dispersive X-ray spectroscopy (EDS) and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). The aim was to investigate the effect of calcium phosphate CaP coating on the corrosion resistance of the titanium TiAlNb alloy and to understand better the deposition process in the production of bioactive functional coatings on metallic implant materials.

No abstract

Polluted urban environment enhances dissolution of patina and underlying bronze material of recent and historical bronze sculptures exposed outdoors. In this work, two bronze statues, situated in one of the most polluted Croatian cities, were examined in order to characterize composition of patina and its electrochemical stability. The composition of patina on several positions on each sculpture was determined by EDS, Raman spectroscopy, and FTIR measurements. Electrochemical impedance spectroscopy measurements were conducted in order to evaluate the corrosion stability of both patina and underlying bronze. Results obtained in this work show that the two examined bronze sculptures were covered with patina layer that was mainly composed of copper sulfides and sulphates, which is in accordance with the high concentrations of H2S and SO2 in the atmosphere. However, the variations in the appearance of FTIR and Raman spectra revealed that the amount of each species differed from spot to spot, as well as the fact that other compounds, such as carbonates, were present at some areas. This difference in patina composition was reflected in electrochemical behavior as observed by electrochemical impedance spectroscopy.

Seawater is a corrosive medium that adversely affects on the metallic structures. For that reason, it is often desirable to use some type of corrosion protection to extend the life of structures. The aim of this work was to examine the possibility of CuNi alloy protection in artificial seawater by four benzimidazole derivatives: 2-amino-5(6)nitrobenzimidazole, 2-amino-5-(6)-cyanobenzimidazole, 2-aminobenzimidazole, 2-amino-5(6)-(2-imidazolinyl)benzimidazole hydrochloride. The corrosion studies conducted by polarization measurements after 1 h of immersion in inhibitor solution showed that the most effective inhibitor is 2-amino-5(6)-nitrobenzimidazole. The electrochemical tests were also performed in time by the means of electrochemical impedance spectroscopy for the two most effective inhibitors. The surface of samples was analyzed by scanning electron microscopy and ATR-FTIR spectroscopy. It was concluded that the efficiency of studied inhibitors increases with prolonged exposure of the CuNi alloy to inhibitor solutions as well as with the increase of inhibitor concentration.

Bronze cultural heritage in urban areas is susceptible to decay due to the significant amount of pollutants present in the air. This causes the dissolution of bronze and the patina on its surface. The efficient protection of outdoor bronze cultural heritage is still an unresolved problem. The aim of this work is to investigate 16-phosphonohexadecanoic acid as an environmentally friendly and non-toxic corrosion inhibitor for patinated bronze. The corrosion protection of sulphide-patinated bronze by phosphonic acid alone and in combination with acrylic coating Paraloid B-72 is examined. In order to achieve efficient corrosion protection, various parameters of the phosphonic acid application were studied. The efficiency of protection is examined by electrochemical impedance spectroscopy (EIS) during the immersion in simulated acid rain solution and after exposure to a corrosion chamber. It was found that the studied phosphonic acid provides corrosion protection to patinated bronze and significantly improves the protective properties of Paraloid B72. This was also confirmed by scanning electron microscopy (SEM) examination of the coating surface after exposure to a corrosive environment.