We demonstrate coherent beam combining using a two-dimensionally patterned diffractive optic combining element. Fifteen Yb-doped fiber amplifier beams arranged in a 3×5 array were combined into a single 600 W, M²=1.1 output beam with 68% combining efficiency. Combining losses under thermally stable conditions at 485 W were found to be dominated by spatial mode-mismatch between the free space input beams, in quantitative agreement with calculations using the measured amplitude and phase profiles of the input beams.

Significant effects from heating occur in both single and two tone fiber amplifiers. Single tone 1064 nm amplifiers have highest efficiency when the external environment surrounding the gain fiber is cold while 1064 nm two tone amplifiers co-seeded with broadband 1040 nm have maximum efficiency when the gain fiber is hot. It is shown experimentally that changes in the temperature of the core of the gain fiber have dramatic effects on the 1064 nm/1040 nm power distribution in the output of two tone amplifiers. This has been attributed to temperature dependence of the absorption and emission cross-sections at the wavelengths of interest.

No abstract

Two-tone 1064 nm fiber amplifiers having both cold (16°C) and pump induced temperature zones co-seeded with narrow linewidth 1064 nm and broad linewidth 1040 nm photons have been shown to have a power enhancement factor between 1.6 and 1.8 relative to the optimum single-tone 1064 nm amplifier while maintaining an efficiency of 65% or greater. The output power and efficiency of 1064 nm narrow linewidth two-tone amplifiers is dependent on the length of the gain fiber, the narrow to broad linewidth seed ratio, the wavelength of the broad linewidth seed and the temperature of the gain fiber.

No abstract