We present a detailed study of two novel methods for shaping the light optical wavefront by employing a transmissive spatial light modulator (SLM). Conventionally, optical Airy beams are created by employing SLMs in the so-called all phase mode. In the first method, a numerically simulated lens phase distribution is loaded directly onto the SLM, together with the cubic phase distribution. An Airy beam is generated at the focal plane of the numerical lens. We provide for the first time a quantitative properties of the formed Airy beam. We derive the formula for deflection of the intensity maximum of the so formed Airy beam, which is different to the quadratic deflection typical of Airy beams. We cross-validate the derived formula by both simulations and experiment. The second method is based on the fact that a system consisting of a transmissive SLM sandwiched between two polarisers can create a transmission function with negative values. This observation alone has the potential for various other wavefront modulations where the transmission function requires negative values. As an example for this method, we demonstrate that a wavefront can be modulated by passing the SLM system with transmission function with negative values by loading an Airy function distribution directly onto SLM. Since the Airy function is a real-valued function but also with negative values, an Airy beam can be generated by direct transfer of the Airy function distribution onto such an SLM system. In this way, an Airy beam is generated immediately behind the SLM. As both new methods do not employ a physical lens, the two setups are more compact than conventional setups for creating Airy beams. We compare the performance of the two novel methods and the properties of the created Airy beams.

In this work, we present our results about the thermal crystallization of ion beam sputtered hafnia on 0001 SiO2 substrates and its effect on the laser-induced damage threshold (LIDT). The crystallization process was studied using in-situ X-ray diffractometry. We determined an activation energy for crystallization of 2.6 ± 0.5 eV. It was found that the growth of the crystallites follows a two-dimensional growth mode. This, in combination with the high activation energy, leads to an apparent layer thickness-dependent crystallization temperature. LIDT measurements @355 nm on thermally treated 3 quarter-wave thick hafnia layers show a decrement of the 0% LIDT for 1 h @773 K treatment. Thermal treatment for 5 h leads to a significant increment of the LIDT values.

Substrate cleaning prior to coating has a strong influence on the performance of the optical component. Exemplary, none or inadequate cleaning reduces the resistance against laser irradiation drastically. Especially in laser components coated with anti-reflective layers, the interface between substrate and coating is one of the most limiting factors. This study investigates different precision cleaning processes and their influence on the laser resistance of ion-beam sputtered anti-reflective coatings. Therefore, a SiO2/Ta2O5 multilayer anti-reflective coating for a wavelength of 1064 nm and a normal angle of incidence was deposited onto high-quality fused silica substrates. Prior to deposition, the substrates were cleaned with various cleaning processes using different solutions and ultrasonic frequencies. To characterize the cleaned surface quality, the surfaces were analyzed with respect to root-mean-square (RMS) roughness and particle density. Laser damage was measured using a 1064 nm ns-pulsed laser test bench. It was found that an alcoholic pre-clean is recommendable to prevent laser damage caused by organic films remaining from the polishing process. The applied ultrasonic frequencies strongly influenced the particle density down to the sub-micrometer range and in consequence, the laser-induced damage threshold (LIDT). Ultrasonic cleaning at excessive power levels can reduce laser resistance.

No abstract

published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.• Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal.If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the "Taverne" license above, please follow below link for the End User