No abstract

Background Ethanol biorefineries need to lower their overall production costs to become economically feasible. Two strategies to achieve this are to reduce costs using cheaper feedstocks or to increase the ethanol production yield. Low-cost feedstocks usually have high non-structural components (NSC) content; therefore, a new process is necessary to accommodate these feedstocks and overcome the negative effects of NSC. This study developed a novel ethanol biorefinery process including a biomass preprocessing step that enabled the use of lower-cost feedstocks while improving ethanol production without detoxification (overliming). Two types of poplar feedstocks were used, low-quality whole-tree chips (WTC) and high-quality clean pulp chips (CPC), to determine if the proposed process is effective while using feedstocks with different NSC contents. Results Technical assessment showed that acidic preprocessing increased the monomeric sugar recovery of WTC from 73.2% (untreated) to 87.5% due to reduced buffering capacity of poplar, improved sugar solubilization during pretreatment, and better enzymatic hydrolysis conversion. Preprocessing alone significantly improved the fermentability of the liquid fraction from 1–2% to 49–56% for both feedstocks while overliming improved it to 45%. Consequently, it was proposed that preprocessing can substitute for the detoxification step. The economic assessment revealed that using poplar WTC via the new process increased annual ethanol production of 10.5 million liters when compared to using CPC via overliming (base case scenario). Also, savings in total operating costs were about $10 million per year when using cheaper poplar WTC instead of CPC, and using recycled water for preprocessing lowered its total operating costs by 45-fold. Conclusions The novel process developed in this study was successful in increasing ethanol production while decreasing overall costs, thus facilitating the feasibility of lignocellulosic ethanol biorefineries. Key factors to achieving this outcome included substituting overliming by preprocessing, enabling the use of lower-quality feedstock, increasing monomeric sugar recovery and ethanol fermentation yield, and using recycled water for preprocessing. In addition, preprocessing enabled the implementation of an evaporator-combustor downstream design, resulting in a low-loading waste stream that can be treated in a wastewater treatment plant with a simple configuration.

The bioeconomy is a complex, multivariate, and interdisciplinary system that requires a comprehensive assessment of its independent parts if it is to be understood fully. Hence, this article presents a holistic perspective of industry, public policy, and education aspects of the US bioeconomy. It is premised on the idea that a successful bioeconomy industry relies on the balanced development of all stages of the supply chain. For this balance to be struck, a strong interdisciplinary workforce must find novel solutions to multifaceted problems across the entirety of the supply chain. These solutions require innovative technologies that can improve the climate benefit of bioproducts, decrease their production costs, and make them more economically competitive. Increasing consumer education and awareness about the bioeconomy goes hand in hand with the development of a robust market for bioproducts. To guide these interdependent efforts, public policies must encourage demand, support competitive markets, promote the entry of renewable options, and stimulate growth by reducing financial barriers. We contend that a combination of policies is likely to be more effective than any singular policy on its own. Supporting the bioeconomy also entails attending to an existing lack of public awareness as well as workforce-ready professionals. To address these gaps, the USA must increase the intensity and intentionality of its efforts to educate students about the bioeconomy, particularly at the K-12 level. Furthermore, these efforts should encompass both formal and informal learning contexts in order to meet the workforce challenges facing the bioeconomy now and in the future.

The use of agricultural waste biomass for nanocellulose production has gained interest due to its environmental and economic benefits compared to conventional bleached pulp feedstock. However, there is still a need to establish robust process technologies that can accommodate the variability of waste feedstocks and to understand the effects of feedstock characteristics on the final nanofiber properties. Here, lignocellulosic nanofibers with unique properties are produced from various waste biomass based on a simple and low-cost process using mild operating conditions. The process robustness is demonstrated by diversifying the feedstock, ranging from food crop waste (corn stover) to invasive grass species (reed canary grass) and industrial lignocellulosic residues (industrial hemp). This comprehensive study provides a thorough examination of the influence of the feedstocks’ physico-chemical characteristics on the conversion treatment, including process yield, degree of delignification, effectiveness of nanofibrillation, fiber morphology, surface charge, and density. Results show that nanofibers have been successfully produced from all feedstocks, with minor to no adjustments to process conditions. This work provides a framework for future studies to engineer nanocellulose with specific properties by taking advantage of biomass feedstocks’ intrinsic characteristics to enable versatile applications.