No abstract

Investigation of a dc power delivery network, consisting of a multilayer PCB using area fills for power and return, involves the distributed behavior of the power/ground planes and the parasitics associated with the lumped components mounted on it. Full-wave methods are often employed to study the power integrity problem. While full-wave methods can be accurate, they are time and memory consuming. The cavity model of a rectangular structure has previously been employed to efficiently analyze the simultaneous switching noise (SSN) in the power distribution network. However, a large number of modes in the cavity model are needed to accurately simulate the impedance associated with the vias, leading to computational inefficiency. A fast approach is detailed herein to accelerate calculation of the summation associated with the higher-order modes. Closed-form expressions for the parasitics associated with the interconnects of the decoupling capacitors are also introduced. Combining the fast calculation of the cavity models of regularly shaped planar circuits, a segmentation method, and closed-form expressions for the parasitics, an efficient approach is proposed herein to analyze an arbitrary shaped power distribution network. While it may take many hours for a full-wave method to do a single simulation, the proposed method can generally perform the simulation with good accuracy in several minutes. Another advantage of the proposed method is that a SPICE equivalent circuit of the power distribution network can be derived. This allows both frequency and transient responses to be done with SPICE simulation.

No abstract

No abstract

This paper presents a microwave camera built upon a two-dimensional array of switchable slot antennas. The camera borrows from modulated scattering techniques to improve isolation among the array elements. The camera was designed to measure vector electric field distribution, be compact, portable, battery operated, possess high dynamic range, and be capable of producing real-time images at video frame-rate. This imaging system utilizes PIN diode-loaded resonant elliptical slot antennas as its array elements integrated in a simple and relatively low-loss waveguide network thus reducing the complexity, cost and size of the array. The sensitivity and dynamic range of this system is improved by utilizing a custom-designed heterodyne receiver and matched filter for demodulation. The performance of the multiplexing scheme, noise-floor and dynamic range of the receivers are presented as well. Sources of errors such as mutual-coupling and array response dispersion are also investigated. Finally, utilizing this imaging system for various applications such as 2-D electric field mapping, and nondestructive testing is demonstrated.