We have applied mixed valance manganite perovskites as magnetocaloric materials in a magnetic refrigeration device. Relying on exact control of the composition and a technique to process the materials into single adjoined pieces, we have observed temperature spans above 9 K with two materials. Reasonable correspondence is found between experiments and a 2D numerical model, using the measured magnetocaloric properties of the two materials as input.

No abstract

A versatile room temperature reciprocating magnetic refrigeration demonstrator has been designed, built and tested in order to evaluate the influence of different running parameters and to check suitable magnetocaloric materials for cooling at room temperature. A comprehensive study has been done with Gd spheres of 0.2-0.4 mm diameter arranged as a double regenerator with 15 g each. A Halbach Nd 2 Fe 14 B permanent magnet with a slot of 10 mm width has been used to generate the magnetic field with a maximum value of 1.4 T. The heat transfer fluid is a mixture of water and ethylene glycol in a 75-25 percentage. The demonstrator achieves a maximum no-load temperature span close to 20 K, with a regeneration ratio of ξ = 4.1, and a maximum cooling poweṙ Q c = 6 W at zero temperature span. COP values have been shown and different thermodynamic AMR cycles have been studied looking for the best parameters.

No abstract