The article presents the possibilities++ of using Rapid Prototyping (RP) technology in the manufacturing of turbine blades with small diameter holes. The object under investigation was gas turbine blade with small diameter cooling holes and holes for generating longitudinal vortices. A turbine blade model was produced by means of Direct Metal Laser Sintering (DMLS) technology and subsequently validated in terms of detection and accuracy of the obtained holes. The application of the computer tomography and digital radiography technique resulted in obtaining a series of cross-sections of the turbine blade model with a series of holes. Particular attention was pointed out at the investigation of the locations of micro-holes with a diameter of 0.3 mm. It turned out that it was impossible to make such small holes by the RP method. In the following part the results of the study on the possibilities of making the micro-holes using electrical discharge method have been presented. In addition, proposition of further works such as the development of the considerations and issues discussed in this article, has been offered.

Purpose The purpose of this study is to evaluate the geometric quality of small diameter holes in parts printed by direct metal laser sintering (DMLS) technology. An in-process optical inspection method is proposed and assessed during a pilot study. The influence of the theoretical hole diameter assumed in a computer-aided design (CAD) system and the sample thickness (hole length) on the hole clearance was analyzed. Design/methodology/approach The samples are made of two different materials: EOS MaragingSteel MS1 and aluminium alloy EOS Aluminium consisted of straight through holes of different diameters and lengths. Dimensional and shape accuracy of the holes were determined with the use of the image processing software and the computer analysis of two-dimensional (2-D) images. The definition of the equivalent hole diameter was proposed to calculate the hole clearance. Feret’s diameters were determined for the evaluation of the shape accuracy. Findings The dependency between the equivalent hole diameter and the theoretical diameter was approximated by the linear function for a specific sample thickness. Additionally, a general empirical model for determining the hole clearance was developed, allowing for calculating the equivalent hole diameter as a function of a sample thickness and a theoretical hole diameter. Practical implications Developed functions can be used by designers for a proper assignment of a hole diameter to achieve the required patency. The relevant procedures and macros based on proposed empirical models can be embedded in CAD systems to support the designing process. Originality/value The analysis of the geometric quality of the holes in parts printed by DMLS was based on the computer analysis of 2-D images. The proposed method of assessing the shape accuracy of straight through holes is relatively cheap, is widely available and can be applied to the features of other shapes produced by three-dimensional printing.

High requirements imposed by the competitive industrial environment determine the development directions of applied manufacturing methods. 3D printing technology, also known as additive manufacturing (AM), currently being one of the most dynamically developing production methods, is increasingly used in many different areas of industry. Nowadays, apart from the possibility of making prototypes of future products, AM is also used to produce fully functional machine parts, which is known as Rapid Manufacturing and also Rapid Tooling. Rapid Manufacturing refers to the ability of the software automation to rapidly accelerate the manufacturing process, while Rapid Tooling means that a tool is involved in order to accelerate the process. Abrasive processes are widely used in many industries, especially for machining hard and brittle materials such as advanced ceramics. This paper presents a review on advances and trends in contemporary abrasive machining related to the application of innovative 3D printed abrasive tools. Examples of abrasive tools made with the use of currently leading AM methods and their impact on the obtained machining results were indicated. The analyzed research works indicate the great potential and usefulness of the new constructions of the abrasive tools made by incremental technologies. Furthermore, the potential and limitations of currently used 3D printed abrasive tools, as well as the directions of their further development are indicated.

The dynamic development of additive manufacturing technologies, especially over the last few years, has increased the range of possible industrial applications of 3D printed elements. This is a consequence of the distinct advantages of additive techniques, which include the possibility of improving the mechanical strength of products and shortening lead times. Offshore industry is one of these promising areas for the application of additive manufacturing. This paper presents a decision support method for the manufacturing of offshore equipment components, and compares a standard subtractive method with an additive manufacturing approach. An analytic hierarchy process was applied to select the most effective and efficient production method, considering CNC milling and direct metal laser sintering. A final set of decision criteria that take into account the specifics of the offshore industry sector are provided.

No abstract