Railway transitions such as bridge approaches experience differential movements related to differences in track system stiffness, track damping characteristics, foundation type, ballast settlement from fouling or degradation, as well as fill and subgrade settlement. Identification of factors contributing to this differential movement and developing design and maintenance strategies to mitigate the problem are imperative for the safe and economical operation of both freight and passenger rail networks. Findings are presented from an ongoing research study at the University of Illinois that focuses on the instrumentation and performance monitoring of railroad bridge approaches with multidepth deflectometers. Sensors installed at the selected approaches are introduced, and details of the instrumentation activity are explained. Track settlement data acquired over time are presented to compare the contributions of different substructure layers with the permanent deformation accumulation. Similarly, transient track deformation data gathered under dynamic train loading are analyzed to quantify the contribution of individual track substructure layers to the total transient deformations. Finally, a new approach is presented; it quantifies the support conditions under instrumented ties and assesses the percentage of the wheel load carried by the instrumented tie. Instrumentation of track transitions with multidepth deflectometers has been shown to quantify the contributions of substructure layers to track settlement adequately. In the bridge approaches instrumented with multidepth deflectometer technology, the ballast layers appear to be the primary source of accumulation for both permanent and transient deformations.

The railroad ballast layer consists of discrete aggregate particles, and the discrete element method (DEM) is the most widely adopted numerical method to simulate the particulate nature of ballast materials and their particle interactions. Large-scale triaxial tests performed in the laboratory under controlled monotonic and repeated loading conditions are commonly considered the best means to measure macroscopic mechanical properties of ballast materials, such as strength, modulus, and deformation characteristics, directly related to load-carrying and drainage functions of the ballast layer in the field. A DEM modeling approach is described for railroad ballast with realistic particle shapes developed from image analysis to simulate large-scale triaxial compression tests on a limestone ballast material. The ballast DEM model captures the strength behavior from both the traditional slow and the rapid shear loading rate types of monotonic triaxial compression tests. The results of the experimental study indicated that the shearing rate had insignificant influence on the results of the triaxial compression tests. The results also showed that the incremental displacement approach captured the measured shearing response, yet could save significant computational resources and time. This study shows that the DEM simulation approach combined with image analysis has the potential to be a quantitative tool to predict ballast performance.

No abstract

No abstract

No abstract