Purpose: Needle-based procedures for diagnosing and treating prostate cancer, such as biopsy and brachytherapy, have incorporated three-dimensional (3D) transrectal ultrasound (TRUS) imaging to improve needle guidance. Using these images effectively typically requires the physician to manually segment the prostate to define the margins used for accurate registration, targeting, and other guidance techniques. However, manual prostate segmentation is a time-consuming and difficult intraoperative process, often occurring while the patient is under sedation (biopsy) or anesthetic (brachytherapy). Minimizing procedure time with a 3D TRUS prostate segmentation method could provide physicians with a quick and accurate prostate segmentation, and allow for an efficient workflow with improved patient throughput to enable faster patient access to care. The purpose of this study was to develop a supervised deep learning-based method to segment the prostate in 3D TRUS images from different facilities, generated using multiple acquisition methods and commercial ultrasound machine models to create a generalizable algorithm for needle-based prostate cancer procedures. Methods: Our proposed method for 3D segmentation involved prediction on two-dimensional (2D) slices sampled radially around the approximate central axis of the prostate, followed by reconstruction into a 3D surface. A 2D U-Net was modified, trained, and validated using images from 84 endfire and 122 side-fire 3D TRUS images acquired during clinical biopsies and brachytherapy procedures. Modifications to the expansion section of the standard U-Net included the addition of 50% dropouts and the use of transpose convolutions instead of standard upsampling followed by convolution to reduce overfitting and improve performance, respectively. Manual contours provided the annotations needed for the training, validation, and testing datasets, with the testing dataset consisting of 20 end-fire and 20 side-fire unseen 3D TRUS images. Since predicting with 2D images has the potential to lose spatial and structural information, comparisons to 3D reconstruction and optimized 3D networks including 3D V-Net, Dense V-Net, and High-resolution 3D-Net were performed following an investigation into different loss functions. An extended selection of absolute and signed error metrics were computed, including pixel map comparisons [dice similarity coefficient (DSC), recall, and precision], volume percent differences (VPD), mean surface distance (MSD), and Hausdorff distance (HD), to assess 3D segmentation accuracy. Results: Overall, our proposed reconstructed modified U-Net performed with a median [first quartile, third quartile] absolute DSC, recall, precision, VPD, MSD, and HD of 94.1 [92.6, 94.9]%, 96.0 [93.1, 98.5]%, 93.2 [88.8, 95.4]%, 5.78 [2.49, 11.50]%, 0.89 [0.73, 1.09] mm, and 2.89 [2.37, 4.35] mm, respectively. When compared to the best-performing optimized 3D network (i.e., 3D V-Net with a Dice plus cross-entropy loss function), our proposed method performed with a significant ...

The presented method encourages real-time implementation of motion compensation algorithms in prostate biopsy with clinically acceptable registration errors. Continuous motion compensation demonstrated registration accuracy with submillimeter and subdegree error, while performing < 50 ms computation times. Image registration technique approaching the frame rate of an ultrasound system offers a key advantage to be smoothly integrated to the clinical workflow. In addition, this technique could be used further for a variety of image-guided interventional procedures to treat and diagnose patients by improving targeting accuracy.

Purpose: Many interventional procedures require the precise placement of needles or therapy applicators (tools) to correctly achieve planned targets for optimal diagnosis or treatment of cancer, typically leveraging the temporal resolution of ultrasound (US) to provide real-time feedback. Identifying tools in two-dimensional (2D) images can often be time-consuming with the precise position difficult to distinguish. We have developed and implemented a deep learning method to segment tools in 2D US images in near real-time for multiple anatomical sites, despite the widely varying appearances across interventional applications. Methods: A U-Net architecture with a Dice similarity coefficient (DSC) loss function was used to perform segmentation on input images resized to 256 × 256 pixels. The U-Net was modified by adding 50% dropouts and the use of transpose convolutions in the decoder section of the network. The proposed approach was trained with 917 images and manual segmentations from prostate/gynecologic brachytherapy, liver ablation, and kidney biopsy/ablation procedures, as well as phantom experiments. Real-time data augmentation was applied to improve generalizability and doubled the dataset for each epoch. Postprocessing to identify the tool tip and trajectory was performed using two different approaches, comparing the largest island with a linear fit to random sample consensus (RAN-SAC) fitting. Results: Comparing predictions from 315 unseen test images to manual segmentations, the overall median [first quartile, third quartile] tip error, angular error, and DSC were 3.5 [1.3, 13.5] mm, 0.8 [0.3, 1.7]°, and 73.3 [56.2, 82.3]%, respectively, following RANSAC postprocessing. The predictions with the lowest median tip and angular errors were observed in the gynecologic images (median tip error: 0.3 mm; median angular error: 0.4°) with the highest errors in the kidney images (median tip error: 10.1 mm; median angular error: 2.9°). The performance on the kidney images was likely due to a reduction in acoustic signal associated with oblique insertions relative to the US probe and the increased number of anatomical interfaces with similar echogenicity. Unprocessed segmentations were performed with a mean time of approximately 50 ms per image. Conclusions: We have demonstrated that our proposed approach can accurately segment tools in 2D US images from multiple anatomical locations and a variety of clinical interventional procedures in near real-time, providing the potential to improve image guidance during a broad range of diagnostic and therapeutic cancer interventions.

Four species of bacteria, E. coli, S. epidermidis, M. smegmatis, and P. aeruginosa, were harvested from agar nutrient medium growth plates and suspended in water to create liquid specimens for the testing of a new mounting protocol. Aliquots of 30 µL were deposited on standard nitrocellulose filter paper with a mean 0.45 µm pore size to create highly flat and uniform bacterial pads. The introduction of a laser-based lens-to-sample distance measuring device and a pair of matched off-axis parabolic reflectors for light collection improved both spectral reproducibility and the signal-to-noise ratio of optical emission spectra acquired from the bacterial pads by laser-induced breakdown spectroscopy. A discriminant function analysis and a partial least squares-discriminant analysis both showed improved sensitivity and specificity compared to previous mounting techniques. The behavior of the spectra as a function of suspension concentration and filter coverage was investigated, as was the effect on chemometric cell classification of sterilization via autoclaving.