No abstract

This article presents a one dimensional modeling of the influence of electromagnetic waves on the electric power delivered by a silicon solar cell under monochromatic illumination in steady state. The electromagnetic waves are produced by an amplitude modulation radio antenna of 2MW power of radiation and located at a variable distance of the solar cell [ [ +∞ , m 10. The magnetotransport and continuity equations of excess minority carriers are solved with boundary conditions and led to new analytical expressions of minority carrier's density, photocurrent density, photovoltage and electric power depending on electromagnetic field intensity and wavelength λ. The dependence of the electromagnetic field and the incident light wavelength on photocurrent density, photovoltage and electric power is studied. The intensity of the electromagnetic field depends on the distance between the solar cell and the amplitude modulation radio antenna. We determine the peak power and the operating point of the solar cell according to distance or electromagnetic field intensity and also according to the wavelength of the monochromatic light.

This article presents a modelling study of external magnetic field effect on a bifacial silicon solar cell's electric power and conversion efficiency. After the resolution of the magnetotransport equation and continuity equation of excess minority carriers, we calculate the photocurrent density and the photovoltage and then we deduce the solar cell's electric power before discussing the influence of the magnetic field on those electrical parameters. Using the electric power curves versus junction dynamic velocity we determine the maximum electric power, the operating point of the solar cell, and the conversion efficiency according to magnetic field intensity. The numerical data show that the solar cell's maximum electric power and conversion efficiency decrease with magnetic field intensity.

This work, presents the intense light effect on electrical parameters of silicon solar such as short circuit current, open circuit voltage, series and shunt resistances, maximum power, conversion efficiency, fill factor. After the resolution of the continuity equation which leads to the solar cell photocurrent and photovoltage expressions, we use the J/V characteristic to determine the solar cell series and shunt resistances. The maximum electric power of the solar cell is determined using the curves of electric power versus junction dynamic velocity, and then, the fill factor and conversion efficiency are calculated. Light concentration and junction dynamic velocity effects on solar cell short circuit current, open circuit voltage, series and shunt resistances, electric power, fill factor and conversion efficiency are also studied. The study proved that with increase of illumination light intensity, the solar cell shunt resistances decreases whereas series resistance, short circuit current, open circuit voltage, electric power, fill factor and conversion efficiency increases.

No abstract