Medically approved sterility methods should be a major concern when developing a polymeric scaffold, mainly when commercialization is envisaged. In the present work, poly(lactic acid) (PLA) fiber membranes were processed by electrospinning with random and aligned fiber alignment and sterilized under UV, ethylene oxide (EO), and γ-radiation, the most common ones for clinical applications. It was observed that UV light and γ-radiation do not influence fiber morphology or alignment, while electrospun samples treated with EO lead to fiber orientation loss and morphology changing from cylindrical fibers to ribbon-like structures, accompanied to an increase of polymer crystallinity up to 28%. UV light and γ-radiation sterilization methods showed to be less harmful to polymer morphology, without significant changes in polymer thermal and mechanical properties, but a slight increase of polymer wettability was detected, especially for the samples treated with UV radiation. In vitro results indicate that both UV and γ-radiation treatments of PLA membranes allow the adhesion and proliferation of MG 63 osteoblastic cells in a close interaction with the fiber meshes and with a growth pattern highly sensitive to the underlying random or aligned fiber orientation. These results are suggestive of the potential of both γ-radiation sterilized PLA membranes for clinical applications in regenerative medicine, especially those where customized membrane morphology and fiber alignment is an important issue. AbstractMedical approved sterility methods should be a major concern when developing a polymeric scaffold, mainly when commercialization is envisaged. In the present work, PLA fibre membranes were processed by electrospinning with random and aligned fibre alignment and sterilized under UV, ethylene oxide (EO) and -radiation, the most common ones for clinical applications. It was observed that UV light and -radiation does not influence fibre morphology or alignment, while electrospun samples treated with EO lead to fibre orientation loss and morphology changing from cylindrical fibres to ribbon like structures, accompanied to an increase of polymer crystallinity up to 28%.UV light and -radiation sterilization methods showed to be less harmful to polymer morphology, without significant changes in polymer thermal and mechanical properties, but a slight increase of polymer wettability was detected, especially for the samples treated with UV radiation. In vitro results indicate that both UV and -radiation treatments of PLA membranes allow the adhesion and proliferation of MG 63 osteoblastic cells in a close interaction with the fibre meshes, and with a growth pattern highly sensitive to the underlying random or aligned fibre orientation. These results are suggestive of the potential of both -radiation sterilized PLA membranes for clinical applications in regenerative medicine, especially those where customized membrane morphology and fibre alignment is an important issue.

Dextrin, a glucose polymer with low molecular weight, was used to develop a fully resorbable hydrogel, without using chemical initiators. Dextrin was first oxidized (oDex) with sodium periodate and then cross-linked with adipic acid dihidrazide, a nontoxic cross-linking molecule. Furthermore, a new bidimensional composite hydrogel, made of oxidized dextrin incorporating dextrin nanogels (oDex-nanogel), was also developed. The oDex hydrogels showed good mechanical properties and biocompatibility, allowing the proliferation of mouse embryo fibroblasts 3T3 cultured on top of the gel. The gelation time may be controlled selecting the concentrations of the polymer and reticulating agent. Both the oDex and oDex-nanogel hydrogels are biodegradable and present a 3-D network with a continuous porous structure. The obtained hybrid hydrogel enables the release of the dextrin nanogel over an extended period of time, paralleling the mass loss curve due to the degradation of the material. The dextrin nanogel allowed the efficient incorporation of interleukin-10 and insulin in the oDex hydrogel, providing a sophisticated system of controlled release. The new hydrogels present promising properties as an injectable carrier of bioactive molecules. Both proteins and poorly water-soluble low-molecular-weight drugs are efficiently encapsulated in the nanogel, which performs as a controlled release system entrapped in the hydrogel matrix.

Genetic engineering was used to produce an elastin-like polymer (ELP) with precise amino acid composition, sequence and length, resulting in the absolute control of MW and stereochemistry. A synthetic monomer DNA sequence encoding for (VPAVG) 20 , was used to build a library of concatemer genes with precise control on sequence and size. The higher molecular weight polymer with 220 repeats of VPAVG was biologically produced in Escherichia coli and purified by hot and cold centrifugation cycles, based on the reversible inverse temperature transition property of ELPs. The use of low cost carbon sources like lactose and glycerol for bacteria cells culture media was explored using Central Composite Design approach allowing optimization of fermentation conditions. Due to its self-assembling behaviour near 33 ºC stable spherical microparticles with a size ~ 1µm were obtained, redissolving when a strong undercooling is achieved. The polymer produced showed hysteresis behaviour with thermal absorbing/releasing components depending on the salt concentration of the polymer solution.

The characterization of several commercial dextrins and the analysis of the potential of dextrin derived hydrogels for biomedical applications were performed in this work. The structural characterization of dextrins allowed the determination of the polymerization and branching degrees, which ranged from 6 to 17 glucose residues and 2 to 13%, respectively. Tackidex, a medical grade dextrin was choosen for further characterization. The combination of hydrogel with a dextrin nanogel and urinary bladder matrix was achieved without compromising the mechanical properties or microstructure. The encapsulation of cells, preserving its viability, confirms the biocompatibility of the injectable hydrogels, which have therefore great potential for biomedical applications.