An anticorrosion layer of a smart polymer coating is developed. The nature and properties of the coating simultaneously provide three mechanisms of corrosion protection: passivation of the metal degradation by controlled release of an inhibitor, buffering of pH changes at the corrosive area by polyelectrolyte layers, and self-curing of the film defects due to the mobility of the polyelectrolyte constituents in the layer-by-layer assembly.

Halloysite particles are aluminum‐silicate hollow cylinders with a length of 0.5–1 µm, an outer diameter of ca. 50 nm and a lumen of 15 nm. These nanotubes are used for loading and sustained release of corrosion inhibitors. The inhibitor is kept inside the particles infinitely long under dry conditions. Here, halloysite nanotubes filled with anticorrosive agents are embedded into a SiOx–ZrOx hybrid film. An aluminum plate is dip‐coated and immersed into 0.1 M sodium chloride aqueous solution for corrosion tests. A defect in the sol–gel coating induces pitting corrosion on the metal accompanied by a strong anodic activity. The inhibitor is released within one hour from halloysite nanotubes at corrosion spots and suppresses the corrosion process. The anodic activity is successfully restrained and the protection remains for a long time period of immersion in NaCl water solution. The self‐healing effect of the sol–gel coating doped with inhibitor‐loaded halloysite nanotubes is demonstrated in situ via scanning vibrating electrode technique measurements.

The development of active corrosion protection systems for metallic substrates is an issue of prime importance for many industrial applications. The present work shows a new contribution to the design of a new protective system based on surface modified mesoporous silica containers. Incorporation of silica‐based containers into special sol–gel matrix allows for a self‐healing effect to be achieved during the corrosion process. The self‐healing ability occurs due to release of entrapped corrosion inhibitors in response to pH changes caused by the corrosion process. A silica–zirconia‐based hybrid film is used in this work as a coating matrix deposited on AA2024 aluminum alloy. Mesoporous silica nano‐particles are covered layer‐by‐layer with polyelectrolyte layers and loaded with inhibitor [2‐(benzothiazol‐2‐ylsulfanyl)‐succinic acid]. The hybrid film with nanocontainers reveals enhanced long‐term corrosion protection in comparison with the individual sol–gel films. The scanning vibrating electrode technique also shows an effective healing ability of containers to cure the corrosion defects. This effect is due to the release of the corrosion inhibitor triggered by the corrosion processes started in the cavities. The approach described herein can be used in many applications where active corrosion protection of materials is required.

The response of cells to changes in their physico-chemical micro-environment is essential to their survival. For example, bacterial magnetotaxis uses the Earth's magnetic field together with chemical sensing to help microorganisms move towards favoured habitats. The studies of such complex responses are lacking a method that permits the simultaneous mapping of the chemical environment and the response of the organisms, and the ability to generate a controlled physiological magnetic field. We have thus developed a multi-modal microscopy platform that fulfils these requirements. Using simultaneous fluorescence and high-speed imaging in conjunction with diffusion and aerotactic models, we characterized the magneto- aerotaxis of Magnetospirillum gryphiswaldense. We assessed the influence of the magnetic field (orientation; strength) on the formation and the dynamic of a micro-aerotactic band (size, dynamic, position). As previously described by models of magnetotaxis, the application of a magnetic field pointing towards the anoxic zone of an oxygen gradient results in an enhanced aerotaxis even down to Earth's magnetic field strength. We found that neither a ten-fold increase of the field strength nor a tilt of 45° resulted in a significant change of the aerotactic efficiency. However, when the field strength is zeroed or when the field angle is tilted to 90°, the magneto-aerotaxis efficiency is drastically reduced. The classical model of magneto-aerotaxis assumes a response proportional to the cosine of the angle difference between the directions of the oxygen gradient and that of the magnetic field. Our experimental evidence however shows that this behaviour is more complex than assumed in this model, thus opening up new avenues for research.

Polyelectrolyte multilayers successively deposited on an ultrasonically pre-treated metal surface demonstrate anticorrosion selfhealing behaviour by the blocking of the corrosion processes without addition of any other inhibiting species due to their pH-buffering ability.