The object of this study is the processes and permissible limits of aging of bus bodies on the frame chassis during operation. As a result of research by simulation method, the durability of the bus on the frame chassis, was determined, which is in the range from 5 to 11 years depending on the operating conditions. The study took into account the following factors: passenger occupancy, microprofile of the road, bus speed, corrosion. The durability of the bus depends primarily on the durability of the frame and body frame. Since the frame is made of alloy steels and heat-treated, it is not repaired but replaced with a new one when cracks in the frame are formed. When determining the durability of the bus on the frame chassis, it was found that the frame has 1.5–1.8 times greater durability than the body frame itself. This is because the frame is made of alloyed materials and has an open structure. The body frame has closed cavities, which provoke the development of corrosion with the accumulation of moisture in them. A feature of the results is that previous studies considered buses only with a load-bearing body structure. The issue of durability of bodies on the frame chassis has been considered. As experience shows, the durability of bus bodies on a frame chassis depends on many operational factors. For operating organizations and manufacturing plants, it is important to provide for the durability of the bus depending on the operating conditions. The results of this study will allow operating organizations to provide for scheduled repairs, as well as take measures to increase the service life of buses during operation. For manufacturing plants, the findings will make it possible to apply rational technologies and materials to form the service life of the bus body.

The article considers the operating conditions that affect the durability of the bus body and proposes measures to increase the durability of public transport bus bodies during operation. The object of study - conditions and measures that affect the durability of public transport bus bodies during operation. Objective - development of recommendations for increasing the durability of bus bodies during operation. Research Methods - analytical. The analysis of factors in the fuel for the car bodywork in the bus transport in the first hour of operation was carried out. It has been established that the car body must be replaced with a bus, so that it's possible to use it and it's possible to immediately renew the anti-corrosion protection. Normal minds are presented: a bus route on roads I - III categories, transportation of passengers at roads, I don't change, technically permissible value, I don't overrun roads at a distance of 50 km / year. I'll show you how to look at the material base of motor transport enterprises, 95% of motor transport companies in Ukraine don't have any notice for a winter bus. In addition, during the winter period, you need to thoroughly think and understand that there is a bus and a bus that is due to obstructions and icy roads. Technology has been scattered, and the anti-corrosion grease has been closed by a worn empty bus body frame. As a result, the robots have been installed, which is effective for the effective anti-corrosion protection of the body elements of the body frame, which is necessary and certified. In addition, during the winter period, you need to thoroughly think and understand that there is a bus and a bus that is due to obstructions and icy roads. Technology has been scattered, and the anti-corrosion grease has been closed by a worn empty bus body frame. As a result, the robots have been installed, which is effective for the effective anti-corrosion protection of the body elements of the body frame, which is necessary and certified. KEY WORDS: BUS, NORMAL OPERATING CONDITIONS, CORROSION PROTECTION, DURABILITY.