Regulatory recommendations for quality by design instead of quality by testing raise increasing interest in new sensor technologies. An online monitoring system for downstream processes is developed, which is based on an array of online detectors. Besides standard detectors (UV, pH, and conductivity), our chromatographic workstation is equipped with a fluorescence and a mid‐infrared spectrometer, a light scattering, and a refractive index detector. The combination of these sensors enables the prediction of specific protein concentration and various purity attributes, such as high molecular weight impurities, DNA and host cell protein content during the elution phase of a chromatographic antibody capture process. Prediction models solely based on online signals are set up providing real‐time predictions. No mechanistic models or information about the chromatographic runs is used. These predictions allow online pooling decisions replacing time‐ and labor‐intensive laboratory measurements. Different process variations, such as changes in the column load or elution buffer, are introduced to test the predictive power of the models. Extrapolation of the models worked well when the column load is changed, whereas model adjustment is necessary when the elution conditions are changed considerably.

The aim of this study was to semi-automate process analytics for the quantification of common impurities in downstream processing such as host cell DNA, host cell proteins and endotoxins using a commercial liquid handling station. By semiautomation, the work load to fully analyze the elution peak of a purification run was reduced by at least 2.41 h. The relative standard deviation of results among different operators over a time span of up to 6 months was at the best reduced by half, e.g. from 13.7 to 7.1% in dsDNA analysis. Automation did not improve the reproducibility of results produced by one operator but released time for data evaluation and interpretation or planning of experiments. Overall, semi-automation of process analytics reduced operator-specific influence on test results. Such robust and reproducible analytics is fundamental to establish process analytical technology and get downstream processing ready for Quality by Design approaches.

No abstract