The vibration dampers, shock absorbers, seismic isolation, bearing seals, compensation devices are widely applied in civil engineering, machine manufacturing and shipbuilding, aviation and aerospace engineering. For these details fabrication elastomeric materials are used. Rubber and rubber-like materials (elastomers) have the capability of absorbing input energy much better than other engineering materials. Elastomeric materials give many engineering advantages due to their high elasticity, good dynamic properties, low volume compressibility, a linear relationship between stress and strain at small and middle deformation, resistance to aggressive environmental factors. The disadvantage of elastomeric materials is ageing, i.e. changing their mechanical properties over time and lowering their operational capability. In given paper the influence of ageing of elastomeric materials on the damping properties of shock absorbers is considered based on the mechanical models of elastomers -Maxwell and Burgers modes.

No abstract

3D printing capabilities are also used in the fashion and textile industries. 3D printed textiles are a new opportunity to create an individual design. Traditional textile structures can be interpreted using 3D printing technologies and materials. One of the most important factors associated with the use of 3D printing technology is to reduce the impact of processing on the physical properties of textile fabrics. Availability of 3D printers at Rezekne Academy of Technologies (RTA) provides experimental work with fabrics of different thickness and fibres as well as different filaments. This study is based on the analysis of synthetic fibre cloth processing and the effect of 3D printing parameters on textile materials. By applying successive layers of materials, the interaction between 3D printing and textiles is studied. In terms of adhesion and stability, the best adhesion parameters for a particular type of fabric are determined by analysing the type of the fabric. The variance analysis method is used to process the research results.

Elastomeric materials, both natural rubber and synthetic, are widely used in industry and civil engineering, due to their unique properties: high elasticity, low volume compressibility, capability to absorb and dissipate input energy, a linear relationship between stress and strain up to strain of 15% ÷ 20%, resistance to aggressive environmental factors. Different kind of compensation devices, vibration dampers, shock absorbers are fabricated from rubber materials.At the same time the elastomeric materials nonreversible change their properties over time, this disadvantage is called ageing.In given paper the results of experimental studying of the influence of aging on the physical-and-mechanical properties of polyurethane rubber is presented. The samples of cylindrical form were prepared from soft flexible polyurethane rubber Xenias PX30 and subjected to the artificial ageing. Accelerated aging of samples was fulfilled in accordance with European standard ISO 188:2011 (Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests).The changing of volume, Shore A hardness, elastic rebound coefficient and static elasticity modulus under compression were investigated. Experiments showed the volume decrease, hardness shore increasing, elastic rebound increase and compression modulus under static loading increasing. This data are necessary for correct designing of the compensation devices to provide their working properties during all service life. 

Brass Alloy 260 is widely used in mechanical engineering (odometer contacts, radiator cores), electrical engineering (electrical connectors, screw shells), plumbing (bathroom fixtures), consumers (watch parts, buttons, lamps) etc. The paper presents an analysis of the laser marking and engraving process. The ability Rofin powerline f20 laser system to engrave on Brass Alloy 260 is described. Recommendations are given on choosing the right parameters for laser marking and engraving of Brass Alloy 260 products.