No abstract

This paper proposes a high step-up high-efficiency converter, comprised of an active switched coupled-inductor cell. The secondary windings are integrated into a rectifier voltage multiplier cell in a boost-flyback configuration, allowing the operation with high voltage gain with low switches duty cycle and low turn-ratios on the coupled-inductors. Both coupled-inductors are integrated into a single core due to the parallel operation of the switches. The leakage inductances of the coupled-inductors are used to mitigate the reverse recovery currents of the diodes, while regenerative clamp circuits are used to protect the switches from the voltage spikes caused by the leakage inductances. The operation of the converter is analyzed both quantitatively and qualitatively, and the achieved results are validated through experimentation of a 400 W prototype. A 97.1% CEC efficiency is also reported.

No abstract

The development of technologies to improve the performance of photovoltaic (PV) module integrated converters (MICs) is fundamental to increase the use of distributed generation systems with photovoltaic power source in large urban centers, mainly for complex residential roofs. For two-stage PV MICs, high step-up DC-DC converters are required to boost the low PV module voltage to a higher voltage, in order to suit the DC bus voltage requirements of grid-tied inverters. Thus, to support researchers interested in developing DC-DC power conversion for PV microinverters, this paper classifies the DC-DC converters according to their operational and constructive characteristics and presents some elementary voltage-boosting techniques to aid in analyzing and understanding more complex topologies. Finally, high step-up DC-DC converters based on magnetic coupling and switched capacitor widely cited by important works related to PV applications are presented, with their principles of operation analysed in a simple and objective way, but sufficient to understand their capability to provide high voltage gain. The approach presented by this paper leads to insight into how to place the energy storage elements to create new topologies of DC-DC converters, so that high voltage gain is achieved, and how to analise the high voltage gain capability of complex topologies

Repetitive controllers (RCs) are linear control structures based on the internal model principle. This control strategy is known for its ability to control periodic reference signals, even if these signals have many harmonic components. Despite being a solution that results in a good performance, several parameters of the repetitive controller need to be correctly tuned to guarantee its stability. Among these parameters, one that has high impact on the system performance and stability is the finite impulse response (FIR) filter, which is usually used to increase the stability domain of RC-based controllers. In this context, this paper presents a complete tutorial for designing the zero-phase FIR filter, which is often used to stabilize control systems that use RC-based controllers. In addition, this paper presents a Matlab® application developed for performing the stability analysis of RC systems and designing its FIR filter. Simulation and experimental results of a shunt active power filter are used to validate the algorithm and the Matlab® application.