No abstract

The industrial progress has reached a level in which it is necessary to understand the behavior of mechanical components and to monitor their conditions without disassembling them. Nowadays, a suitable methodology is based on vibrational analysis usually performed through acceleration signals measured directly on the system to be tested. However, in the last years, the industrial scenario has deeply changed due to the need for time reduction, in particular, for the control operations at the end of the productive line. The genuine methods based on acceleration measurements, for example, through piezoelectric accelerometers, came into conflict with the industrial need as the sensors used for the quality control have to be easily and fastly mounted and unmounted. A valid alternative is represented by the exploitation of laser triangulation sensors that are able to measure the dynamic displacement in a contactless way, strongly reducing the (un)mounting time. The target of this paper is to highlight pros and cons of the contactless displacement analysis through laser triangulation sensors with respect to the contact one through genuine accelerometers by means of a comparison between the results obtained both for experimental modal analysis and vibrational diagnostics of rotating machines.

The monitoring of rolling element bearings through vibration-based condition indicators plays a crucial role in the modern machinery. The kurtosis is a very efficient indicator being sensitive to impulsive components within the vibration signature that often are symptomatic of localized faults. In order to improve the diagnostic performance of the kurtosis, blind deconvolution algorithms can be exploited in order to detect bearing faults and, most importantly, their position. In this scenario, this paper focuses on the development of a novel condition indicator specifically designed for the damage assessment in rolling element bearings. The proposed indicator allows to track the bearing degradation process taking into account three different possible positions: outer race, inner race, and rolling element. This indicator fits real-time monitoring procedures allowing for the automatic detection and identification of the bearing fault. The validation of the proposed indicator has been carried out by means of both simulated signal and a run-to-failure experiment. The results highlight that the proposed indicator is able to detect more efficiently the fault occurrence and, most importantly, quicker than other established techniques.

No abstract