A new structure of switched capacitor multilevel inverter (SCMLI) capable of voltage boosting and with self-balancing ability is introduced in this article. This advantage is the result of a step by step rise of capacitor voltages in each module, supplied by just one DC voltage source. The proposed topology generates a sinusoidal output waveform with a magnitude several times greater than the input one. Higher output staircase AC voltage is obtained by applying a nearest level control (NLC) modulation technique. The most significant features of this configuration can be mentioned as: fewer semiconductor devices, remarkably low total harmonic distortion (THD), desirable operating under high /low frequency, high efficiency, inherent bipolar voltage production, easy circuit expansion, ease of control and size reduction of the circuit thanks to utilizing neither bulky transformer nor inductor. Moreover, the proposed SCMLI is comprehensively surveyed through theoretical investigation and a comparison of its effectiveness to recent topologies. Eventually, the operating principle of a 25-level prototype of the suggested SCMLI is validated by simulation in the MATLAB SIMULINK environment and experimental results.

In this paper, a step-up seven-level inverter supplied by a single DC source suitable for renewable energy application is presented. Forming the desired output is realized by charging capacitors and synthesizing them based on switched-capacitor concept. This structure is praised for the ability of sensor-less voltage balancing of the capacitors, reducing control complexity to produce a bipolar staircase waveform. It also benefits from regenerative performance, avoiding unwanted capacitors overvoltage. Phase Disposition Pulse Width Modulation (PD-PWM) technique is utilized to control the circuit operation. Furthermore, a comparison with other recent topologies reveals that losses, number of semiconductor devices, and gate driver circuits are reduced. Theoretical analysis is verified through a laboratory prototype implementation. Experimental results under various types of loads approve the performance of the proposed inverter and validity of the design. Finally, maximum experimental efficiency of 94.3% (115 V, 250 W load) was reached.

This paper aims to present a novel switched-capacitor multi-level inverter. The presented structure generates a staircase near sinusoidal AC voltage by using a single DC source and a few capacitors to step-up the input voltage. The nearest level control (NLC) strategy is used to control the operation of the converter. These switching states are designed in a way that they always ensure the self-voltage balancing of the capacitors. Low switching frequency, simple control, and inherent bipolar output are some of the advantages of the presented inverter. Compared to other existing topologies, the structure requires fewer circuit elements. Bi-directional power flow ability of the proposed topology, facilitates the operation of the circuit under wide range of load behaviors which makes it applicable in most industries. Besides, a 13-level laboratory prototype is implemented to realize and affirm the efficacy of the MATLAB Simulink model under different load conditions. The simulation and experimental results accredit the appropriate performance of the converter. Finally, a theoretical efficiency of 92.73% is reached.

the necessity of using several components in multilevel inverters jeopardizes the reliability of their operation. Hence, the aim of this research is to propose a novel single-phase fault-tolerant topology based on switched-capacitor concept to ensure robustness of the converter in the occurrence of a fault. The proposed single source converter steps up the input voltage seven times with a simple control strategy. Fault Tolerance of the converter is achieved by considering multiple fault cases and providing several redundant switching schemes concerning the type and location of failure. Each switching scheme is designed in a way to ensure the tolerability to both single and multiple open/short circuit failure. Also, self-voltage balancing of the capacitors, as well as the same amount of voltage levels and amplitude in the output is guaranteed. Experimental analysis is carried out, and the results confirm the viability of the proposed inverter under normal and post-fault operating modes.

A bi-level operation scheduling of distribution system operator (DSO) and multi-microgrids (MMGs) considering both the wholesale market and retail market is presented in this paper. To this end, the upper-level optimization problem minimizes the total costs from DSO’s point of view, while the profits of microgrids (MGs) are maximized in the lower-level optimization problem. Besides, a scenario-based stochastic programming framework using the heuristic moment matching (HMM) method is developed to tackle the uncertain nature of the problem. In this regard, the HMM technique is employed to model the scenario matrix with a reduced number of scenarios, which is effectively suitable to achieve the correlations among uncertainties. In order to solve the proposed non-linear bi-level model, Karush–Kuhn–Tucker (KKT) optimality conditions and linearization techniques are employed to transform the bi-level problem into a single-level mixed-integer linear programming (MILP) optimization problem. The effectiveness of the proposed model is demonstrated on a real-test MMG system.