Based on the powerful concept of embedded dipole self‐assembled monolayers (SAMs), highly conductive interfacial layers are designed, which allow tuning the contact resistance of organic thin‐film transistors over three orders of magnitude with minimum values well below 1 kΩ cm. This not only permits the realization of highly competitive p‐type (pentacene‐based) devices on rigid as well as flexible substrates, but also enables the realization of n‐type (C60‐based) transistors with comparable characteristics utilizing the same electrode material (Au). As prototypical examples for the high potential of the presented SAMs in more complex device structures, flexible organic inverters with static gains of 220 V/V and a 5‐stage ring‐oscillator operated below 4 V with a stage frequency in the range of the theoretically achievable maximum are fabricated. Employing a variety of complementary experimental and modeling techniques, it is shown that contact resistances are reduced by i) eliminating the injection barrier through a suitable dipole orientation, and by ii) boosting the transmission of charge carriers through a deliberate reduction of the SAM thickness. Notably, the embedding of the dipolar group into the backbones of the SAM‐forming molecules allows exploiting their beneficial effects without modifying the growth of the active layer.

Self-assembled monolayers (SAMs) are frequently used for interfacial dipole engineering in organic electronics and photovoltaics. This is mostly done by the attachment of dipolar tail groups onto the molecular backbone of the SAM precursors. The alternative concept of embedded dipoles involves the incorporation of polar group(s) into the backbone. This allows one to decouple the tuning of the electrostatic properties of the SAM from the chemical identity of the SAM−ambient interface. Here we present design and synthesis of particularly promising SAM precursors utilizing this concept. These precursors feature the thiol-docking group and a short heteroaromatic backbone, consisting of a nonpolar phenyl ring and a polar pyrimidine group, embedded in two opposite orientations. Packing density, molecular orientation, structure, and wetting properties of the SAMs on Au substrates are found to be nearly independent of their chemical structure, as shown by a variety of complementary experimental techniques. A further important property of the studied SAMs is their good electrical conductivity, enabling their application as electrode modifiers for low-contact resistances in organic electronic devices. Of particular interest are also the electronic properties of the SAMs, which were monitored by Kelvin probe and high-resolution X-ray photoelectron spectroscopy measurements. To obtain a fundamental understanding of these properties at an atomistic level, the experiments were combined with state-of-the-art band structure calculations. These not only confirm the structural properties of the films but also explain how the C 1s core-level binding energies of the various atoms are controlled by their chemical environments in conjunction with the local distribution of the electrostatic potential within the monolayer.

When employing self-assembled monolayers (SAMs) for tuning surface and interface properties, organic molecules that enable strong binding to the substrate, large-area structural uniformity, precise alignment of functional groups, and control of their density are highly desirable. To achieve these goals, tripod systems bearing multiple bonding sites have been developed as an alternative to conventional monodentate systems. Bonding of all three sites has, however, hardly been achieved, with the consequence that structural uniformity and orientational order in tripodal SAMs are usually quite poor. To overcome that problem, we designed 1,8,13-trimercaptomethyltriptycene (T1) and 1,8,13-trimercaptotriptycene (T2) as potential tripodal SAM precursors and investigated their adsorption behavior on Au(111) combining several advanced experimental techniques and state-of-the-art theoretical simulations. Both SAMs adopt dense, nested hexagonal structures but differ in their adsorption configurations and structural uniformity. While the T2-based SAM exhibits a low degree of order and noticeable deviation from the desired tripodal anchoring, all three anchoring groups of T1 are equally bonded to the surface as thiolates, resulting in an almost upright orientation of the benzene rings and large-area structural uniformity. These superior properties are attributed to the effect of conformationally flexible methylene linkers at the anchoring groups, absent in the case of T2. Both SAMs display interesting electronic properties, and, bearing in mind that the triptycene framework can be functionalized by tail groups in various positions and with high degree of alignment, especially T1 appears as an ideal docking platform for complex and highly functional molecular films.

Three different benzodithiophene derivatives were designed to isolate the effects of bond topology from that of functional groups in quantum interference to examine the role of the quinone functionality separate from cross-conjugation.