Micropollutants have been increasingly detected at low concentrations in surface waters and may have harmful effects on humans, organisms, and the environment. As wastewater treatment plants are one of the main sources of micropollutants, conventional wastewater treatment methods and plants (mainly one to three cleaning stages) must be improved through an advanced (fourth) treatment stage. The optimal fourth treatment stage should be determined based not only on removal efficiencies but also on a holistic sustainability assessment that further considers the process’s adaptability, economic, environmental, and social parameters. The ability of a tertiary wastewater treatment plant to remove organic pollutants was investigated over four months using two different advanced treatment methods: (1) an advanced oxidation process (AOP) (using UV + H2O2) and (2) granular activated carbon (GAC). The resulting average micropollutant removal efficiencies were 76.4 ± 6.2% for AOP and 90.0 ± 4.6% for GAC. As the GAC became saturated, it showed a decreasing performance from 97.6% in week one to 80.7% in week 13, after 2184 bed volumes were processed. For the AOP, adjusting the UV and H2O2 doses results in higher removal efficiencies. With 40 ppm H2O2 and 10 kJ/m2 UV, a removal of 97.1% was achieved. Furthermore, the flexibility and adaptability of the AOP process to adjust to real-time water quality, along with a lower resource consumption and waste disposal, make it a more promising technology when comparing the sustainability aspects of the two methods.

Fluorescent staining of microplastics as a detection method is consistently gaining importance in microplastics research, as it is fast, easy to use, and requires low technical effort. In this study, a complete procedure was developed, from sample collection to sample processing and detection, to measure microplastics with low cost and time requirements. The developed procedure was tested by measuring the microplastics in the effluent of a German wastewater treatment plant over a period of one year. The results show that the process is especially well suited to investigate temporal variations of microplastic contamination, which requires a large number of samples to be processed. Further, the precision and selectivity of the detection process could be improved by applying newly developed Nile red derivatives for fluorescent staining. A low budget modification of a microscope for fluorescent imaging is compared to a modification with precise optical bandpass filters. A script enabling automated microplastic detection and counting was developed, improving the accuracy and comparability of the process.

No abstract

Wastewater treatment plants (WWTPs) have been identified as important point sources of micropollutants and microplastics into the environment. Existing fourth cleaning steps are designed to remove dissolved micropollutants, however do not target dispersed solids such as microplastics. Therefore, the ability of an Advanced Oxidation Process (AOP) and Granular Activated Carbon (GAC) in parallel and serial connection to remove microplastics was investigated and determined. The pilot plants were operated at the municipal WWTP Landau, Germany, a three-step biological waste treatment plant with a capacity of 80,000 population equivalents. A Nile red-based detection method was applied to quantify microplastics. Neither method showed a significant removal of microplastics. To achieve a simultaneous removal of microplastics and dissolved micropollutants, a pilot plant using organosilanes for microplastics’ removal was connected in series with the GAC. When added to the water, the organosilanes attach to the microplastics and collect them in agglomerates by chemically binding them in a water-induced sol–gel process. The pilot plant for microplastics’ removal was operated with a flow rate of 12 m3/h and a retention time of 10 min; the GAC with 2 m3/h and a retention time of 1 h. An average reduction in micropollutants by 86.2 ± 2.0% and a reduction in microplastics by 60.9 ± 27.5% was reached. Thus, there is an effective reduction in micropollutants and a significant reduction in microplastics. Further optimizations of the pilot plant are expected to result in a more stable and higher removal performance.

To ensure that charging electric vehicles (EVs) supports, rather than strains, the nation’s electric grids, we will need consumers to adopt smart charging, also known as vehicle-grid integration (VGI). This paper presents the findings of a consumer survey on VGI of prospective and current Honda EV owners in the United States.