No abstract

The technical development of electronics, the continuous reduction in the size of GNSS receptors, allied with the energy consumption decrease, transformed these products into some integrated circuits or in small Chips as small as size of a button of a shirt. In this way one can promote its integration with countless electronic devices. The association with cell phones was mainly driven by the mandate to enhance services 911 (E911) of the Federal Communications Commission (FCC) in the United States, requiring that all mobile carriers of that country provide all the emergency calls location with good accuracy. So as to fulfill this necessity, the production of Chips in a large scale has been stimulated and therefore the decrease in cost and its popularity. In this way almost in its entirety, cell phones are now manufactured with GPS receivers, which makes these devices one of the cheapest sources to obtain the geopositioning. It turns out that there is a gap in the literature about how precise and accurate the coordinates provided by these equipments can be. This thesis aims through statistical tests and comparison with other GPS receivers and methods, quantify these values and propose a methodology to improve such positioning. To achieve the objective, the structure of the phone's operating system was modified in such a way that it was possible to access the embedded GPS Chipset observables and then converted into the RINEX standard raw data file. The tests were carried out with the original equipment and with the modified ones, with an external antenna installation which showed that using the phase measure of the carrier, the equipment can provide a positioning with an average accuracy of 0, 069m, with a default deviation of 0, 047m and a maximum planimetric positioning error of 0, 218m and a minimum of 0, 004m.

This content is licensed under a Creative Commons Attribution 4.0 International License.