International audienceHighly dispersed crystalline/amorphous LiFePO4 (LFP) nanoparticles encapsulated within hollow-structured graphitic carbon were synthesized using an in situ ultracentrifugation process. Ultracentrifugation triggered an in situ sol–gel reaction that led to the formation of core–shell LFP simultaneously hybridized with fractured graphitic carbon. The structure has double cores that contain a crystalline LFP (core 1) covered by an amorphous LFP containing Fe3+ defects (core 2), which are encapsulated by graphitic carbon (shell). These core–shell LFP nanocomposites show improved Li+ diffusivity thanks to the presence of an amorphous LFP phase. This material enables ultrafast discharge rates (60 mA h g-1 at 100C and 36 mA h g-1 at 300C) as well as ultrafast charge rates (60 mA h g-1 at 100C and 36 mA h g-1 at 300C). The synthesized core–shell nanocomposites overcome the inherent one-dimensional diffusion limitation in LFP and yet deliver/store high electrochemical capacity in both ways symmetrically up to 480C. Such a high rate symmetric capacity for both charge and discharge has never been reported so far for LFP cathode materials. This offers new opportunities for designing high-energy and high-power hybrid supercapacitors

Nanocrystalline Li3VO4 dispersed within multiwalled carbon nanotubes (MWCNTs) was prepared using an ultracentrifugation (uc) process and electrochemically characterized in Li-containing electrolyte. When charged and discharged down to 0.1 V vs Li, the material reached 330 mAh g(-1) (per composite) at an average voltage of about 1.0 V vs Li, with more than 50% capacity retention at a high current density of 20 A g(-1). This current corresponds to a nearly 500C rate (7.2 s) for a porous carbon electrode normally used in electric double-layer capacitor devices (1C = 40 mA g(-1) per activated carbon). The irreversible structure transformation during the first lithiation, assimilated as an activation process, was elucidated by careful investigation of in operando X-ray diffraction and X-ray absorption fine structure measurements. The activation process switches the reaction mechanism from a slow "two-phase" to a fast "solid-solution" in a limited voltage range (2.5-0.76 V vs Li), still keeping the capacity as high as 115 mAh g(-1) (per composite). The uc-Li3VO4 composite operated in this potential range after the activation process allows fast Li(+) intercalation/deintercalation with a small voltage hysteresis, leading to higher energy efficiency. It offers a promising alternative to replace high-rate Li4Ti5O12 electrodes in hybrid supercapacitor applications.

Capacitive deionization concept based on suspension electrodes without ion exchange membranes. (2014) Electrochemistry Communications, 43. 18-21.