Reflective color filters using two-dimensional photonic crystals based on sub-wavelength gratings were proposed and constructed. Using low-cost nanoimprint lithography, an amorphous silicon layer was deposited through the low-temperature PECVD process and patterned into two-dimensional structures. The isolated amorphous silicon patterns were readily crystallized using a multi-shot excimer laser annealing at low energy. A study of the close relationship between color filter reflectance and silicon pattern crystallinity is introduced. Theoretical and experimental results show that the proposed color filters have high reflectance and, moreover, decrease the dependence on incident angle compared to one-dimensional photonic crystal color filters.

No abstract

A partial etching mechanism is proposed to meet the requirement for low-visibility patterning of silver nanowire (AgNW)-based transparent conductive electrodes (TCEs) by reducing the difference in optical properties between conductive and nonconductive regions of the pattern. Using the finite difference time domain (FDTD) method, etched geometries that provide the smallest difference in transmittance after etching are theoretically determined. A sodium hypochlorite-based etchant capable that allows the etched geometry to be varied by controlling the pH is used to create a low-visibility pattern with a transmittance and haze difference of 0.07 and 0.04%, respectively. To the best of our knowledge, this is the first time that a partial etching mechanism such as this has been studied in relation to AgNW-based TCEs.

SUMMARYAn a priori error estimator for the generalized-time-integration method is developed to solve structural dynamic problems e ciently. Since the proposed error estimator is computed with only information in the previous and current time-steps, the time-step size can be adaptively selected without a feedback process, which is required in most conventional a posteriori error estimators. This paper shows that the automatic time-stepping algorithm using the a priori estimator performs more e cient time integration, when compared to algorithms using an a posteriori estimator. In particular, the proposed error estimator can be usefully applied to large-scale structural dynamic problems, because it is helpful to save computation time. To verify e ciency of the algorithm, several examples are numerically investigated.

The integration of bottom-up fabrication techniques and top-down methods can overcome current limits in nanofabrication. For such integration, we propose a gradient area-selective deposition using atomic layer deposition to overcome the inherent limitation of 3D nanofabrication and demonstrate the applicability of the proposed method toward large-scale production of materials. Cp(CH3)5Ti(OMe)3 is used as a molecular surface inhibitor to prevent the growth of TiO2 film in the next atomic layer deposition process. Cp(CH3)5Ti(OMe)3 adsorption was controlled gradually in a 3D nanoscale hole to achieve gradient TiO2 growth. This resulted in the formation of perfectly seamless TiO2 films with a high-aspect-ratio hole structure. The experimental results were consistent with theoretical calculations based on density functional theory, Monte Carlo simulation, and the Johnson-Mehl-Avrami-Kolmogorov model. Since the gradient area-selective deposition TiO2 film formation is based on the fundamentals of molecular chemical and physical behaviours, this approach can be applied to other material systems in atomic layer deposition.