Copper nanowires (Cu NWs) have gained attention as an alternative to noble metal nanowires due to their affordable price, but their susceptibility to rapid oxidization in ambient conditions has remained a critical limitation for their practical usage. Many studies have been conducted to address this disadvantage but have been successful only in terms of oxidation prevention at certain temperatures, leaving the matter of oxidation at high temperatures unresolved. In this article, a simple encapsulation structure made of a polyimide and SiOx thin film is presented that effectively prevents the penetration of oxygen and moisture into the Cu NW network. This structure, furthermore, boasts excellent stability at high temperature (≈350 °C) and in underwater, acidic chemical, and abrasive conditions.

Among many attempts to make a decent human motion detector in various engineering fields, a mechanical crack-based sensor that deliberately generates and uses nano-scale cracks on a metal deposited thin film is gaining attention for its high sensitivity. While the metal layer of the sensor must be responsible for its high performance, its effects have not received much academic interest. In this paper, we studied the relationship between the thickness of the metal layer and the characteristics of the sensor by depositing a few nanometers of chromium (Cr) and gold (Au) on the PET film. We found that the sensitivity of the crack sensor improves/increases under the following conditions: (1) when Au is thin and Cr is thick; and (2) when the ratio of Au is lower than that of Cr, which also increases the transmittance of the sensor, along with its sensitivity. As we only need a small amount of Au to achieve high sensitivity of the sensor, we have suggested more efficient and economical fabrication methods. With this crack-based sensor, we were able to successfully detect finger motions and to distinguish various signs of American Sign Language (ASL).

Inspired by the rolling mechanism of the proboscis of a butterfly, rollable electronics that can be rolled and unrolled to a great extent on demand are developed. Generally, electronic devices that are attached to various surfaces to acquire biosignals require mechanical flexibility and sufficient adhesive force. The rollable platform provides sufficient force that grips onto the entire target surface without destroying the target organ. To prove the versatility of our device not only in gripping and detecting biosignals from micro objects but also in performing a variety of functions, thin-film electronics including a heater, strain sensor and temperature sensor are constructed on the rollable platform, and it is confirmed that all the electronics operate normally in the rolled and unrolled states without breakdown. Then, micro bio-objects are gripped by using the rollable platform, and their tiny motions are successfully detected with the sensor on the platform. Furthermore, the detection of the pulse wave signals of swine under diverse experimental conditions is successfully conducted by rolling up the rollable system around the blood vessel of the swine, the result of which proves the feasibility of a rollable platform as a biomedical device.

Measuring the foot plantar pressure has the potential to be an important tool in many areas such as enhancing sports performance, diagnosing diseases, and rehabilitation. In general, the plantar pressure sensor should have robustness, durability, and high repeatability, as it should measure the pressure due to body weight. Here, we present a novel insole foot plantar pressure sensor using a highly sensitive crack-based strain sensor. The sensor is made of elastomer, stainless steel, a crack-based sensor, and a 3D-printed frame. Insoles are made of elastomer with Shore A 40, which is used as part of the sensor, to distribute the load to the sensor. The 3D-printed frame and stainless steel prevent breakage of the crack-based sensor and enable elastic behavior. The sensor response is highly repeatable and shows excellent durability even after 20,000 cycles. We show that the insole pressure sensor can be used as a real-time monitoring system using the pressure visualization program.

The hydrogen economy refers to an economic and industrial structure that uses hydrogen as its main energy source, replacing traditional fossil-fuel-based energy systems. In particular, the widespread adoption of hydrogen fuel cell vehicles (HFCVs) is one of the key factors enabling a hydrogen economy, and aggressive investment in hydrogen refuelling infrastructure is essential to make large-scale adoption of HFCVs possible. In this study, we address the problem of effectively designing a hydrogen supply network for refuelling HFCVs in urban areas relatively far from a large hydrogen production site, such as a petrochemical complex. In these urban areas where mass supply of hydrogen is not possible, hydrogen can be supplied by reforming city gas. In this case, building distributed hydrogen production bases that extract large amounts of hydrogen from liquefied petroleum gas (LPG) or compressed natural gas (CNG) and then supply hydrogen to nearby hydrogen stations may be a cost-effective option for establishing a hydrogen refuelling infrastructure in the early stage of the hydrogen economy. Therefore, an optimization model is proposed for effectively deciding when and where to build hydrogen production bases and hydrogen refuelling stations in an urban area. Then, a case study of the southeastern area of Seoul, known as a commercial and residential center, is discussed. A variety of scenarios for the design parameters of the hydrogen supply network are analyzed based on the target of the adoption of HFCVs in Seoul by 2030. The proposed optimization model can be effectively used for determining the time and sites for building hydrogen production bases and hydrogen refuelling stations.